Weld-on 40
 

Hi guys, I have a problem with my Vertex reactor: I need to glue PVC to acrylic. I posted another thread with the details, and I found out the best product for the job is Weld-on 40. The problem is that by the time I source some, I will be without a reactor for a while....

Does anybody in the Lower Mainland have any Weld-on 40? I need a tiny amount and I'm willing to drive, and, obviously pay...

Are you running the reactor outside of the sump?

Industrial plastics in richmond sells weld on. I've used #4052 to bond acrylic to abs and pvc before if you want something thicker #10 works great.

The following places should sell it too

CAN BC BURNABY 13060
E M PLASTIC & ELECTRIC 6990 GREENWOOD ST. V5A 1X8 604-420-5000 LTF

CAN BC BURNABY 23258
EAST WEST PLASTIC & ELECTRIC 103-105 6741 CARIBOO RD. V3N 4A3 604-420-8900 LTF

CAN BC COQUITLAM 5344
SABIC POLYMERSHAPES UNIT #104 11 BURBRIDGE ST. V3K 7B2 604-468-2112 LTF

CAN BC SURREY 37563
LAIRD PLASTICS Unit #200 - 19670 92A Avenue V1M 3B2 604-888-8332 LCA

CAN BC NEW WESTMINSTER 4584
ACRYLCO MFG. LTD. 711 DERWENT WAY, ANNAIS ISL. V3M 5P9 604-524-9441 LTF

Yes, outside. Besides, this pipe is the just below the intake to the recirculating pump, so it needs to me water-tight....

[quote=Default;1023039]Industrial plastics in richmond sells weld on. I've used #4052 to bond acrylic to abs and pvc before if you want something thicker #10 works great.

/QUOTE]

Thanks Default; I will get some tomorrow.

So, I got a pint of the stuff; thanks Default! I used one one-hundredth of the volume for my joint, and now I am stuck with the rest. So, should any of you Canreef folks want some, please PM me.