Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Filtration and Skimmer Specific (http://www.canreef.com/vbulletin/forumdisplay.php?f=174)
-   -   Require assistance with a vertex omega 130 skimmer (http://www.canreef.com/vbulletin/showthread.php?t=124412)

reef-keeper 10-03-2017 05:27 PM

Require assistance with a vertex omega 130 skimmer
 
This is a blog I wrote but thought I'd get a better response through posting it as a thread. I bought this skimmer over 1 year ago. I have never been able to have this unit run like it is supposed to run. When I bought it I was told when first installing it to run it wide open for the first week or so or until it calms down. Well that never happened. It was over flowing like no tomorrow so I shut it down, went to work out of town. I came back thought it was in too deep of water so I lifted it up from 9" to 7-1/2". Let it run started out OK but within the hour it was back to a constant overflow. Again shut it down go back to work for another 21 days. I lifted the unit again to the minimum depth in the noted in the manual 6-1/2". Then tried it again. Started OK the did the same thing went right to overflowing. so I Just unplugged it and let it sit. Now it has been a few months since i tried it. I've changing water and replacing the carbon and Phosguard in the reactors a lot. I lost most of the wild life I had in the tank while having the wife look after it, I'm not blaming I should not have set it up then go out of town for weeks on end. I just about ready to give up. But I'm going to try one more time. If anybody is willing to assist me in setting up this nightmare in Edmonton I will not turn him/her down.

Bugger 10-03-2017 06:03 PM

Do you have filter socks that were not prewashed. They are coated with something that causes skimmers to go nuts

albert_dao 10-03-2017 06:40 PM

Have you adjusted the intake valve?

reef-keeper 10-03-2017 08:44 PM

No I always prewash everything. And tried turning the valve all the way in and out. Nothing changes. I think you are talking about the valve on the pump right??

Bugger 10-04-2017 12:35 AM

Did you add anything like new rocks

AquaAddict 10-04-2017 03:45 AM

I had to clean mine with vinegar, keep water level at a steady 7 in., and partially block the air intake with a piece of very coarse black foam. After a few months, it started running properly.

reef-keeper 10-04-2017 03:48 AM

Quote:

Originally Posted by Bugger (Post 1019037)
Did you add anything like new rocks



No nothing a

reef-keeper 10-04-2017 03:51 AM

Quote:

Originally Posted by AquaAddict (Post 1019047)
I had to clean mine with vinegar, keep water level at a steady 7 in., and partially block the air intake with a piece of very coarse black foam. After a few months, it started running properly.



Mine came with a silencer foam. I

albert_dao 10-04-2017 04:14 AM

Here's what you want to do:

1. get a tub you can fill to 6-7" of FRESHLY MIXED (using RODI - this is important) salt water.
2. throw your skimmer in it.
3. you should be able to get it to work by fiddling with the adjustments.

If you can get it to operate properly, you have a baseline from whence you can troubleshoot.

reef-keeper 10-04-2017 11:50 AM

Quote:

Originally Posted by albert_dao (Post 1019051)
Here's what you want to do:

1. get a tub you can fill to 6-7" of FRESHLY MIXED (using RODI - this is important) salt water.
2. throw your skimmer in it.
3. you should be able to get it to work by fiddling with the adjustments.

If you can get it to operate properly, you have a baseline from whence you can troubleshoot.



I will try this today. Maybe I


All times are GMT. The time now is 10:48 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.