Anywhere Drill Tanks in Edmonton
 

I want to drill my tank im sure it can be drilled because its all half inch glass but was wondering if there is anybody locally that does it?
Thanks Cam

If you can't find anyone of the hobbists here to do it, a any glass shop should be able to perform that service for you.

Hey Cam,

Ask Brad he should know, what size of hole were you thinking of having drilled?

Greg

I dont even know, all i know is that i don't want to setup a hang on skimmer so im going to go the sump route, but really don't know anything about it yet.
I image the size of hole will depend on what skimmer i get?
I should ask Brad my saltwater guru, he's down for the weekend with the flu or something, hopefully he gets better soon.

Call one of the shops in town that sells tanks, ask them if they drill tanks, and if they sell the fittings you would need.

I bet a glass shop would be alot cheaper than a aquarium shop, and they will have alot more experience with drilling glass also.

Thanks Guys I will Look Around!

Glass drilling
 

Hey Cam,

The best place to go in town is to Wholesale Bevel and Edge. That is where I had them drill my glass and cut it as well.

http://www.yellowpages.ca/business/A...?src=&stype=si

You do run the risk of the glass breaking. But chances are it won't. They will ask you if the glass is tempered. Hopefully it isn't. If it is, it will explode when then go to drill it. Most likely it isn't tempered. Most manufactured tanks (ie oceanic, all-glass) have a tempered bottom,while the side are not tempered.

Brad

or wait til i come up this week, and i can drill it for ya, if you have a dremel and the cutter i have the time to do it ...

Contact Rusty. He can drill holes for bulkheads from 1/2" to 2" with a diamond hole saw. I should know because he's using my bits!:mad: :bad-word: :razz:

Also, I would personally go with the larger sized holes, that way you have an easier upgrade path in the future (i.e. get a bigger return pump) and the chances of the standpipe plugging are greatly reduced.