Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   GE Silicone Problems.. (http://www.canreef.com/vbulletin/showthread.php?t=88439)

Aquattro 07-31-2012 02:30 PM

GE Silicone Problems..
 
PSA: There have been several threads recently detailing crashes and issues with tanks after using GE I or II silicone to repair or build new additions to tanks. While GE I has historically been reef safe, and I've used it myself for years, there are reports that they are now adding a mildew inhibitor to this mix as well. This seems to be verified by the crashes reported.
GE 1200 is still highly recommended, as are several other products on the market at hardware stores, marked as "aquarium safe".

Please do a search here for threads detailing the problems and alternate products to use instead.
Alternatively, if anyone wants to post in this thread what they used and where they purchased it, that might make it easier.
Please, no discussions of issues with silicone, just what you used and where you got it.

Thanks.

Borderjumper 07-31-2012 02:53 PM

I've been using Adbond 005 100% silicone, its a green tube with the fish on the label. I get mine at Castle Building Center and I think Industrial paints and plastics and Ace hardware also carry it

Aquattro 07-31-2012 04:14 PM

If you're reading this after the fact, here is some useful info..

Quote:

Originally Posted by ScubaSteve (Post 734461)
The mildew inhibitors are petroleum distillates. The only thing that will remove them is aspiration by a skimmer (basically "undissolving" them) and big water changes. They don't stick to carbon. The silicone may also be leaching ammonia if it didn't cure long enough. Add an ammonia absorbing pad.

. GE didn't even list the petroleum distillates in their MSDS until recently as they were a trade secret.


sphelps 07-31-2012 04:30 PM

Is there away to determine what is bad or good by the packaging or some other test? I recently used a small amount of GE#1 but it was from a tube I've had lying around for quite some time. I never saw any effects but would like to check if possible.

Proteus 07-31-2012 06:42 PM

I went and bought weather shield silicon which states aquarium safe on the tube. From home hardware for around $7

MarkoD 07-31-2012 06:56 PM

If the bottle says 100% silicone, it's safe to use.

99.999999......% or less is not safe to use

Aquattro 07-31-2012 07:00 PM

Quote:

Originally Posted by MarkoD (Post 734500)
If the bottle says 100% silicone, it's safe to use.


This is not accurate info. This thread is to list products you've used successfully, and where you bought it.

MarkoD 07-31-2012 07:02 PM

Quote:

Originally Posted by Aquattro (Post 734503)
This is not accurate info. This thread is to list products you've used successfully, and where you bought it.

GE 100% silicon bough at Rona.

Never an issued, used as recently as a month ago to add bubble trap to sump

Reef Puffer 07-31-2012 07:57 PM

http://i1254.photobucket.com/albums/...r/silicone.jpg is it safe? or is it not?

The Grizz 07-31-2012 11:28 PM

GE SCS1200 is all I will use EVER. I know for a FACT 2 tank builders use it & nothin but. I bought a case of black at Sabic PolyMerShapes as well as some from Concepts in Calgary.


All times are GMT. The time now is 12:34 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.