Canreef Aquatics Bulletin Board
Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Filtration and Skimmer Specific (http://www.canreef.com/vbulletin/forumdisplay.php?f=174)
-   -   Require assistance with a vertex omega 130 skimmer (http://www.canreef.com/vbulletin/showthread.php?t=124412)

reef-keeper 10-05-2017 03:22 PM
It seems Tapa talk won’t show my full reply. Did I add more rocks? No. As for putting a foam on the air intake mine has a foam silencer on it all ready. I will wash the unit in vinager the set it in a Rubbermaid tub for a month to see if it will settle down. Any body else have input. All advice will be appreciated.

albert_dao 10-05-2017 04:28 PM
Quote:
Originally Posted by reef-keeper (Post 1019103)
It seems Tapa talk won’t show my full reply. Did I add more rocks? No. As for putting a foam on the air intake mine has a foam silencer on it all ready. I will wash the unit in vinager the set it in a Rubbermaid tub for a month to see if it will settle down. Any body else have input. All advice will be appreciated.
I'd just use hot tapwater and a sponge/nylon brush.

AquaAddict 10-05-2017 05:36 PM
Mine has a foam silencer as well. That is not what I mean. The outside nozzle tip can be partially plugged with a strip (that you would have to cut) of coarse foam. You can then lift it up or down to control the air intake and that is what I did to control the bubble level. It worked very well for me.

AquaAddict

reef-keeper 10-06-2017 11:42 PM
Quote:
Originally Posted by albert_dao (Post 1019106)
I'd just use hot tapwater and a sponge/nylon brush.


Sounds good.

reef-keeper 10-06-2017 11:43 PM
Quote:
Originally Posted by AquaAddict (Post 1019108)
Mine has a foam silencer as well. That is not what I mean. The outside nozzle tip can be partially plugged with a strip (that you would have to cut) of coarse foam. You can then lift it up or down to control the air intake and that is what I did to control the bubble level. It worked very well for me.



AquaAddict


Oh I see. I will see if I can get something that will fit.

AquaAddict 10-10-2017 03:49 AM
If you haven't cleaned the skimmer with vinegar, that should be done first. Also consider installing a filter sock - I think already mentioned. All could be of help.

AquaAddict


All times are GMT. The time now is 10:33 PM.
Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.