Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Buy/Sell/Trade (Aquatics hardware related only) (http://www.canreef.com/vbulletin/forumdisplay.php?f=31)
-   -   FS: TANK SHUTDOWN - EVERYTHING MUST GO!! (http://www.canreef.com/vbulletin/showthread.php?t=99281)

GMGQ 07-17-2013 11:57 PM

FS: TANK SHUTDOWN - EVERYTHING MUST GO!!
 
PART 2 of my tank shutdown: EQUIPMENT

70G Tank @ $20:
- Not drilled
- 4x2x2
- Plexiglass reinforced cross brace

29G Frag Tank @ $20
- Drilled
- Frag racks included
- http://reefblog604.wordpress.com/201...tank-progress/

28LED Light Setup @ $100
- 29”x4”
- 14 XP-E (Royal Blue) Cree LED
- 14 XP-G (Cool White) Cree LED
- Ballasts included
- Dimmer included to control blues and whites separately
- http://reefblog604.wordpress.com/201...-lamark-angrl/

DIY HOB Acrylic Overflow @ $10:
- dual 1" outputs
- http://members.shaw.ca/reefblog/reef...Y_Overflow.htm

Algae Scrubber Setup @ $10:
- 5G Tank
- Pump not included
- http://reefblog604.wordpress.com/201...-on-frag-tank/

20G Sump @ $10:
- Not drilled
- 2 sections, acrylic baffles

5G Chaeto/Refugium Tank @ $10
- DIY Acrylic
- 10”x13”x13”
- http://members.shaw.ca/reefblog/reef...t/refugium.htm

DIY Canopy @ $20:
- 48”x24”x24”
- 2x front access doors with earth magnets to hold them up
- Hinged top access
- http://members.shaw.ca/reefblog/reef...D/DIY_Hood.htm

DIY Stand @ $50:
- About 6’Wx3’Dx3’H
- DIY built in power center on left side with timers
- http://members.shaw.ca/reefblog/reef.../DIY_Power.htm
- http://members.shaw.ca/reefblog/reef.../DIY_Stand.htm

Dual 250W Metal Halide Setup @ $150:
- (2) Icecap 250W MH Electronic Ballasts w/ Custom Aluminum Heatsinks
- (2) 250W, 12,000K Mogul Bulbs (need replacing)
- Aluminum Spider Reflectors
- DIY Quick Disconnects
- http://members.shaw.ca/reefblog/reef...t/lighting.htm

Dual 48” 54W T5 Setup @ $100:
- Icecap 660 Electronic Ballast w/ Stock Heatsink & Custom Aluminum Heatsink
- (2) 48" Giesemann 54W Actinic+ Bulbs
- (2pair) Icecap T5 Endcaps & Standoffs
- (2) Icecap SLR Clip-on T5 Reflectors
- DIY Quick Disconnect
- http://members.shaw.ca/reefblog/reef...t/lighting.htm

Complete RO/DI Setup @ $120:
- Aquasafe Maximus kit
- With 5Gallon tank
- Some spare media and DI included
- Auto Topoff included
- http://members.shaw.ca/reefblog/reef...to_top-off.htm

Blueline 40HD-X Pump @ $100
- 1200GPH

Eheim 1262 Pump @ $80
- 900GPH

MAG7 Pump @ $60
- 700GPH

Euro-Reef RS135 Protein Skimmer @ $150
- With gate valve output mod
- Sedra 5000 pump with mesh mod

Complete Calcium Reactor Setup @ $100
- Coralife Calcium Reactor 500, modified recirculation with Maxijet pump
- 10lbs Aluminum CO2 Tank
- Milwaukee Regulator with bubble counter, solenoid and needle valve
- Milwaukee pH Controller (#SMS122)
- Leftover Caribsea A.R.M. Reactor Media
- http://members.shaw.ca/reefblog/reef...um_reactor.htm

OM Squirt @ $50
- Throw in 2x OM revolutions
- Drum replaced and used for a few months only
- http://members.shaw.ca/reefblog/reef...losed_loop.htm

TLF150 and various other media reactors @ $10/ea

Eheim 2234 Cannister Filter @ $80

ROX1.3 ½ Bucket @ $50

HCGFO ½ Bucket @ $50

Instant Ocean Salt @ $20
- More than half a bucket left

Hydor Koralia Smartwave Controller @ $50
- Includes 2 power bars so you can control multiple pumps on each channel

Various Powerheads @ $5-50
- Maxijet, Hydor, Tunze

Lots of Plumbing parts and accessories: FREE with Purchase!

* I’m sure there’s lots of other stuff I’ve forgotten, so it’s first come first served – NO HOLDING (unless I know you, and even then, you better buy LOTS!)
* Don’t ask me for details or pictures. I don’t have easy access to the place and you should know how to google for specs.
* Most of the equipment hasn't been cleaned. You'll just have to soak it in 50/50 vinegar/water, and it'll look like new.

Please email me:
gmgq23@gmail.com

Located in South Vancouver.

Thanks Guys.

daplatapus 07-18-2013 02:05 AM

pm'd

msjboy 07-18-2013 02:07 AM

pmed & emailed for the calcium reactor and a TLF reactor
thx

msjboy

catgoldfish 07-18-2013 04:37 AM

PM'd

GMGQ 07-18-2013 05:07 PM

Hi Guys,

Wow, Lots of interest (I should have raised the prices!). But it's all good.

I've received lots of emails and texts, and I'm sorry but I'm just too busy to reply to everyone.

A lot of the stuff has been spoken for, so after this weekend I'll have a better idea of what's left. I'll try to post a revised list on sunday when the dust settles.

I do have all your emails and texts, so if any deals fall through, I'll track who was next in line and get in touch with you. If I don't get back to you, then you can assume what you asked for has been sold.

Thanks for your patience and understanding guys.


P.S. I've also got some furniture for sale for those coming by and interested :P

GMGQ 07-22-2013 05:18 PM

Update on what's left
 
OK first, thanks to everyone who showed up and picked up what they said they wanted. It was great meeting some new faces, and great seeing old ones. Gonna miss the community in general :(

So I had one guy who was quick to call me when I posted, and said he wanted this and that. Since he was taking so much, I agreed to hold it for him -- but he never showed up. I called him and he said he was busy and would call me back. Then nothing. This is why I don't like holding stuff! So much for being a nice guy. Like I said, I DO NOT LIVE THERE ANYMORE. I have to make a special trip out there to meet you guys, so if you're not serious, then don't bother. We're all busy, so if I have to take out time to go there and meet up with you, please show up! Plus I try to schedule a window to meet a bunch of people, so that I don't have to go all the way there to meet 1 guy for a $10 item.

Sorry, had to get that off my chest. :S

Now please see below for the updated list. Until something is actually SOLD (cash_in_my_hand), then it will stay on this list. Having said that, I do have dibs on a few items, and I will be in touch with those people in the order I received their messages to make pickup arrangements. I Will be there tonight (Monday, July 22nd@7pm+) for anyone who wants to come by.


Quote:

Originally Posted by GMGQ (Post 832599)
PART 2 of my tank shutdown: EQUIPMENT

29G Frag Tank w/ Stand @ $40
- Drilled
- stand: 5'W x 1'D x 3'H
- Frag racks included
- foam padding under tank included
- stand includes built in lighting rig for hanging a fixture
- http://reefblog604.wordpress.com/201...tank-progress/

DIY HOB Acrylic Overflow @ $10:
- dual 1" outputs
- http://members.shaw.ca/reefblog/reef...Y_Overflow.htm

Algae Scrubber Setup @ $10:
- 5G Tank
- Pump not included
- http://reefblog604.wordpress.com/201...-on-frag-tank/

5G Tank @ $5

20G Sump @ $10:
- Not drilled
- 2 sections, acrylic baffles

DIY Canopy @ $20:
- 48”x24”x24”
- 2x front access doors with earth magnets to hold them up
- Hinged top access
- http://members.shaw.ca/reefblog/reef...D/DIY_Hood.htm

DIY Stand @ $50:
- About 6’Wx3’Dx3’H
- DIY built in power center on left side with timers
- http://members.shaw.ca/reefblog/reef.../DIY_Power.htm
- http://members.shaw.ca/reefblog/reef.../DIY_Stand.htm

Dual 250W Metal Halide Setup @ $150:
- (2) Icecap 250W MH Electronic Ballasts w/ Custom Aluminum Heatsinks
- (2) 250W, 12,000K Mogul Bulbs (need replacing)
- Aluminum Spider Reflectors
- DIY Quick Disconnects
- http://members.shaw.ca/reefblog/reef...t/lighting.htm

Dual 48” 54W T5 Setup @ $100:
- Icecap 660 Electronic Ballast w/ Stock Heatsink & Custom Aluminum Heatsink
- (2) 48" Giesemann 54W Actinic+ Bulbs
- (2pair) Icecap T5 Endcaps & Standoffs
- (2) Icecap SLR Clip-on T5 Reflectors
- DIY Quick Disconnect
- http://members.shaw.ca/reefblog/reef...t/lighting.htm

Complete RO/DI Setup @ $120:
- Aquasafe Maximus kit
- With 5Gallon tank
- Some spare media and DI included
- Auto Topoff included
- http://members.shaw.ca/reefblog/reef...to_top-off.htm

Blueline 40HD-X Pump @ $100
- 1200GPH

Eheim 1262 Pump @ $80
- 900GPH

QuietOne Pump (TBD, need to verify model#)

MAG7 Pump @ $60
- 700GPH

Euro-Reef RS135 Protein Skimmer @ $150
- With gate valve output mod
- Sedra 5000 pump with mesh mod

Complete Calcium Reactor Setup @ $100
- Coralife Calcium Reactor 500, modified recirculation with Maxijet pump
- 10lbs Aluminum CO2 Tank
- Milwaukee Regulator with bubble counter, solenoid and needle valve
- Milwaukee pH Controller (#SMS122)
- Leftover Caribsea A.R.M. Reactor Media
- http://members.shaw.ca/reefblog/reef...um_reactor.htm

OM Squirt @ $50
- Throw in 2x OM revolutions
- Drum replaced and used for a few months only
- http://members.shaw.ca/reefblog/reef...losed_loop.htm

1 media reactor @ $10/ea

Eheim 2234 Cannister Filter @ $80

ROX1.3 ½ Bucket @ $50

HCGFO ½ Bucket @ $50

Hydor Koralia Smartwave Controller @ $50
- Includes 2 power bars so you can control multiple pumps on each channel

Various Powerheads @ $5-50
- Maxijet, Hydor, Tunze

Jager 250W Heater (New in Box, never used) @ $25

Won Brothers 250W Titanium Heater w/ LED Display @ $20

Various vinyl tubing, from 1/4"-1/2" (in a box approx. 8"x12"x8") @ $10

Lots of Plumbing parts and accessories: FREE with Purchase!

* I’m sure there’s lots of other stuff I’ve forgotten, so it’s first come first served – NO HOLDING (unless I know you, and even then, you better buy LOTS!)
* Don’t ask me for details or pictures. I don’t have easy access to the place and you should know how to google for specs.
* Most of the equipment hasn't been cleaned. You'll just have to soak it in 50/50 vinegar/water, and it'll look like new.

Please email me:
gmgq23@gmail.com

Located in South Vancouver.

Thanks Guys.


GMGQ 07-22-2013 05:38 PM

Update on what's left
 
OK first, thanks to everyone who showed up and picked up what they said they wanted. It was great meeting some new faces, and great seeing old ones. Gonna miss the community in general :(

So I had one guy who was quick to call me when I posted, and said he wanted this and that. Since he was taking so much, I agreed to hold it for him -- but he never showed up. This is why I don't like holding stuff! So much for being a nice guy. Like I said, I DO NOT LIVE THERE ANYMORE. I have to make a special trip out there to meet you guys, so if you're not serious, then don't bother. We're all busy, so if I have to take out time to go there and meet up with you, please show up! Plus I try to schedule a window to meet a bunch of people, so that I don't have to go all the way there to meet 1 guy for a $10 item.

Sorry, had to get that off my chest. :S

Now please see below for the updated list. Until something is actually SOLD (cash_in_my_hand), then it will stay on this list. Having said that, I do have dibs on a few items, and I will be in touch with those people in the order I received their messages to make pickup arrangements. I Will be there tonight (Monday, July 22nd@7pm+) for anyone who wants to come by.


Quote:

Originally Posted by GMGQ (Post 832599)
PART 2 of my tank shutdown: EQUIPMENT

29G Frag Tank w/ Stand @ $40
- Drilled
- Frag racks included
- foam padding under tank included
- stand includes built in lighting rig for hanging a fixture
- http://reefblog604.wordpress.com/201...tank-progress/

DIY HOB Acrylic Overflow @ $10:
- dual 1" outputs
- http://members.shaw.ca/reefblog/reef...Y_Overflow.htm

Algae Scrubber Setup @ $10:
- 5G Tank
- Pump not included
- http://reefblog604.wordpress.com/201...-on-frag-tank/

5G Tank @ $5

20G Sump @ $10:
- Not drilled
- 2 sections, acrylic baffles

DIY Canopy @ $20:
- 48”x24”x24”
- 2x front access doors with earth magnets to hold them up
- Hinged top access
- http://members.shaw.ca/reefblog/reef...D/DIY_Hood.htm

DIY Stand @ $50:
- About 6’Wx3’Dx3’H
- DIY built in power center on left side with timers
- http://members.shaw.ca/reefblog/reef.../DIY_Power.htm
- http://members.shaw.ca/reefblog/reef.../DIY_Stand.htm

Dual 250W Metal Halide Setup @ $150:
- (2) Icecap 250W MH Electronic Ballasts w/ Custom Aluminum Heatsinks
- (2) 250W, 12,000K Mogul Bulbs (need replacing)
- Aluminum Spider Reflectors
- DIY Quick Disconnects
- http://members.shaw.ca/reefblog/reef...t/lighting.htm

Dual 48” 54W T5 Setup @ $100:
- Icecap 660 Electronic Ballast w/ Stock Heatsink & Custom Aluminum Heatsink
- (2) 48" Giesemann 54W Actinic+ Bulbs
- (2pair) Icecap T5 Endcaps & Standoffs
- (2) Icecap SLR Clip-on T5 Reflectors
- DIY Quick Disconnect
- http://members.shaw.ca/reefblog/reef...t/lighting.htm

Complete RO/DI Setup @ $120:
- Aquasafe Maximus kit
- With 5Gallon tank
- Some spare media and DI included
- Auto Topoff included
- http://members.shaw.ca/reefblog/reef...to_top-off.htm

Blueline 40HD-X Pump @ $100
- 1200GPH

Eheim 1262 Pump @ $80
- 900GPH

QuietOne Pump (TBD, need to verify model#)

MAG7 Pump @ $60
- 700GPH

Euro-Reef RS135 Protein Skimmer @ $150
- With gate valve output mod
- Sedra 5000 pump with mesh mod

Complete Calcium Reactor Setup @ $100
- Coralife Calcium Reactor 500, modified recirculation with Maxijet pump
- 10lbs Aluminum CO2 Tank
- Milwaukee Regulator with bubble counter, solenoid and needle valve
- Milwaukee pH Controller (#SMS122)
- Leftover Caribsea A.R.M. Reactor Media
- http://members.shaw.ca/reefblog/reef...um_reactor.htm

OM Squirt @ $50
- Throw in 2x OM revolutions
- Drum replaced and used for a few months only
- http://members.shaw.ca/reefblog/reef...losed_loop.htm

1 media reactor @ $10/ea

Eheim 2234 Cannister Filter @ $80

ROX1.3 ½ Bucket @ $50

HCGFO ½ Bucket @ $50

Hydor Koralia Smartwave Controller @ $50
- Includes 2 power bars so you can control multiple pumps on each channel

Various Powerheads @ $5-50
- Maxijet, Hydor, Tunze

Jager 250W Heater (New in Box, never used) @ $25

Won Brothers 250W Titanium Heater w/ LED Display @ $20

Various vinyl tubing, from 1/4"-1/2" (in a box approx. 8"x12"x8") @ $10

Lots of Plumbing parts and accessories: FREE with Purchase!

* I’m sure there’s lots of other stuff I’ve forgotten, so it’s first come first served – NO HOLDING (unless I know you, and even then, you better buy LOTS!)
* Don’t ask me for details or pictures. I don’t have easy access to the place and you should know how to google for specs.
* Most of the equipment hasn't been cleaned. You'll just have to soak it in 50/50 vinegar/water, and it'll look like new.

Please email me:
gmgq23@gmail.com

Located in South Vancouver.

Thanks Guys.


GMGQ 07-22-2013 05:55 PM

Mods pls delete double post. Thx.

sirruckus 07-22-2013 06:07 PM

JUST following your post - and wanted to say I can totally understand the first come first serve thing. I've been screwed over by other members on here as well.

why Canreef hasn't adopted a feedback option for business dealings, I don't know.

canadawest 07-23-2013 01:40 AM

Powerheads?
 
Sent email & PM re: powerheads

Interested in 1-2, please send models & asking price


All times are GMT. The time now is 01:01 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.