Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Tank Journal (http://www.canreef.com/vbulletin/forumdisplay.php?f=18)
-   -   Kevin and Emme`s Biocube of High Powered Awesome Build (LEDs and Typhon Controller) (http://www.canreef.com/vbulletin/showthread.php?t=93962)

ScubaSteve 01-26-2013 08:52 AM

Kevin and Emme`s Biocube of High Powered Awesome Build (LEDs and Typhon Controller)
 
So a number of months ago I had this great idea: I'm gonna make me a frickin' tank for my office. Yeah! That`s what I'll do! I'm a damn genius!:mrgreen:

I picked up an old Biocube 14 from a buddy for the very fair price of beer and got it on home. Set it up with some rock and let it start cycling in the hallway (yes, that is the most convenient place to cycle a tank. Trust me:rolleyes:). I decided I wanted to play around with LEDs because I might upgrade my main tank to LEDs in the summertime once I've finished my PhD; this biocube would be my experiment. So I decided to do it on the cheap. A few cheap eBay LEDs... some cheapo drivers... just enough to make the bare minimum. After all, it was just going to be at my office.

http://i927.photobucket.com/albums/a...1CDCF8E071.jpg

Ya.... that idea didn't last long. Em and I started to grow attached to that little tank, and once we got a couple of clowns in there, we realized we kinda liked it. Damn! I'm now one of THOSE guys with multiple tanks:razz:. Oh well... Also, the plans for the LEDs kinda escalated... fast... like really fast. I now have an excessive number of LEDs primed and ready to go into this tank... The Biocube of High Powered Awesome!

And thus begins our build thread...

There are tons of threads on the intertubes using the RapidLED kits. Meh, too basic for me. I wanted something custom. But my god is there a sore lack of information out there for doing Biocube builds, especially if you want to do anything outside of a kit. So with this thread I really hope I can fill in some of the knowledge gaps.

The LEDs
First of all, a big thanks to Milad at LED Group Buy. He set me up with some awesome LEDs for this build. Em and I wanted to go the full spectrum route and play around with some of the newer LED ideas out there. The LED mix I eventually settled on is:

4x Cree 3-Ups (2x XT-E Royal Blue, 1 XT-E White)
2x Ocean Coral White - 3-Ups(Red, Green, Cyan)
4x True Violet (405 nm) - I went this route as I wanted more of the black light effect

I opted to use the 3-ups because I wanted all of the LEDs as close together as possible to minimize colour banding. I cannot emphasize how much I hate f***ing colour banding in LEDs. It just looks retarded. I'm happy to see some of the manufacturers are reducing the spacing between the LEDs so that they more or less act light a single light source and you only see the weird colour shadows and colour bands on the outside edges. Because of the small size of this tank and the lack of optics on the LEDs, the funky edges should mostly fall outside of the tank. We'll see how it does. I've got some tricks up my sleeve to get rid of colour banding if it does rear its head and get annoying.

http://i927.photobucket.com/albums/a...C0242D6A14.jpg

You'll see in the pic above that I've put the LEDs into two tightly spaced clusters, essentially acting like two light sources. Without going to a custom PCB (which I did contemplate) this is as close together as you can reasonably get the LEDs.

Heatsink
Got a great 10"x4.25" Heat sink from ModularLED. For anyone else doing a biocube build: You could potentially use a heat sink up to 12" but 9"-10" seems to be best as you can still fit cooling fans in the hood to blow down the length of the heat sink. Width-wise you could go up to 6" but I wouldn't go past that, especially if you went with a longer heatsink. Really, IMO anything past 4.25" on a biocube isn't really worth it. The ModularLED heatsink I got conveniently fits well into the biocube. The bosses (ie. the plastic lugs) that the old PCs screwed into fit nicely between the fins of the heatsink, giving a nice and sturdy fit. Use the screw holes in the reflector to mark out your drill holes for the through holes to attached the heatsink.

http://i927.photobucket.com/albums/a...C0270EE98E.jpg
http://i927.photobucket.com/albums/a...C029494567.jpg

In this pic I've already drilled and started to tap the holes to hold down the LEDs. For reference I used 5/16" long #4-40 pan head machine screws with nylon washers. The washers are key otherwise your screws could short the LEDs to the heatsink if you're not careful. For this reason I've only attached the OCWs by the very outside edge because the LEDs have exposed leads above the PCB they're mounted on. Go slow and use lots of lube when you're tapping otherwise you'll break the taps. 4-40 taps are small and weak.

http://i927.photobucket.com/albums/a...C02B6CC872.jpg

All done! I am using 1" long #5 flathead wood screws to attach the heatsink to the biocube hood. Ideally I'd use machine screws but the existing PC set up is mounted with wood screws and the bosses on the hood were designed more with the wood screws in mind. If you do decide to use a #5 or #6 machine screw and are having trouble getting it to self tap, heat the screw up with a lighter, then screw it in. Old plastic machining trick. I've also counter sunk the through holes for the flathead screws using a 82 degree, three flute counter sink bit. If you've never done this before, it's very easy to do but takes a bit of care and patience. After drilling your through holes with a drill press, toss the counter sinking bit in the chuck and bring the bit down to the heat sink. Put the bit in the hole and turn it backwards by hand a bit (allow the heatsink to move when doing this). This will perfectly center the countersinking bit in your through hole. Turn on your drill press and go at it SLOWLY. Unless you have a drill press where you can adjust the spindle speed the counter sink bit will have a tendency to chatter in the hole. This will a) scare the **** out of you and b) give you a rough hole. Just go slow so that very fine flakes of metal are coming off and you'll avoid chatter. If it does chatter and gives a rough hole, keep calm and don't move the piece you're countersinking. Just go at it slowly to clean up the hole and proceed as per normal. Sink the holes wide enough for the #5 screw head to fit flush with the top (the countersink hole should be roughly 5/16" to 3/8" in diameter).

Power Supply and Drivers
For this build I decided to go with the Meanwell LDD-700-H drivers. They're super cheap (when you don't get them from Mouser like ended up having to do) and have wicked performance. Dom (daplatapus) and I spent a stupid amount of time trying to track down LDDs at their normal price of $5-6 per but they have been impossible to find. A suitable alternative would be the BuckPuck drivers if you're having trouble finding the LDDs. Thanks to Chatouille I got my hands on one of the awesome 4-up LDD driver boards that the guys over at RC are designing. I'm pitching in where I can over there to add some extra options to the future boards, so I may end up swapping out this board in the future. To account for that I used 24 pin machine IC sockets on the boards so that I can pop the LDDs off this board and put them onto the new board.

Here's Em populating the board. She literally just learned how to solder when I took this pic and she's already soldering like a ninja! (She'll also probably kill me for putting up this pic :neutral:)

http://i927.photobucket.com/albums/a...C02E557264.jpg

Here, I'll embarrass myself too :razz:

http://i927.photobucket.com/albums/a...C036EEFEE6.jpg

Here's the board all done with the IC sockets:

http://i927.photobucket.com/albums/a...C0394285D0.jpg

And all gussied up with the drivers:

http://i927.photobucket.com/albums/a...C03DAA0D9C.jpg

Thing of beauty, no? I'll be inplementing a bunch of tricks with this board. I may or may not take the time to write up all of this, but if you are using these drivers, feel free to PM me for a discussion and I can teach you. Hopefully the tricks I am using will be implemented in future boards over on RC (they already are) so it'll be self explanatory.

For the power supply I went with a Meanwell NES-100-24. This is an adjustable 24V power supply. Awesome power supply, great price. Need I say more?

Controller Enclosure
Man, I've been having fun with this one. I wanted something slick. Something worthy of showing off. I decided to go with a nice, see-thru polycarbonate enclosure from McMaster-Carr. Most Canadians won't be able to order these but through work I can get them. They are the bees knees.

I opted to go with the Typhon controller for a number of reason but it came down to having all the options I wanted and, because it's Arduino based, I can easily modify the sketch. I do solar research at work, so I'm pretty picky about lighting control. I have some ideas on how to better simulate natural sun cycles with the controller that I want to implement when I have the time. But the trick with this is that I want to have the screen and buttons accessible while it's mounted in the enclosure. So, of course, there was only one reasonable solution: CNC mill that muthatucka!

http://i927.photobucket.com/albums/a...2CEF4F4015.jpg

Here it is all finished:

http://s927.beta.photobucket.com/use...ml?sort=3&o=11

A bit more monkeying around, adding holes for the buttons, etc... this is what you get:

http://i927.photobucket.com/albums/a...2CD8F4C313.jpg

Fits like a glove! When I get up in the morning I'm going to make some button extenders so that that buttons are easily accessible on the surface. Pics will follow. I'll also be mounting the controller to the lid once I can get some 7/8" long flathead 4-40 screws in the morning.

I also added stand offs to the driver PCB so I could also mount it to the lid. Here it is all mounted up:

http://i927.photobucket.com/albums/a...2CE149F309.jpg

More to come tomorrow as I finish this up!

reef-keeper 01-26-2013 10:59 AM

Awesome where did you buy the LEDs and drivers?

mohammadali 01-26-2013 11:10 AM

Veryyy niceee

Stones 01-26-2013 01:10 PM

Great looking DIY led project. Thanks for taking the time to document all of the steps in detail!

daplatapus 01-26-2013 02:58 PM

That looks awesome so far! Great job. Hmmm, might need to get ya to make me a cover ... :D
My LDD's are supposed to leave China today (fingers crossed).
Are you going to power your Typhon with the same power supply as the LED's? How have you planned to step down the V's?

mseepman 01-26-2013 03:26 PM

This is looking like a great build. Love how detailed you've done the thread for those following you.

Whiston 01-26-2013 04:32 PM

I love seeing these build threads.
I'll be following this one for sure.

ScubaSteve 01-26-2013 06:07 PM

Thanks everyone! My biggest. Complaint has always been th lack of detail in builds, so I'm trying to go all out with details so that it's easy to follow in my footsteps. If I am missing anything, let me know and I'll add it!

Just getting my ass out of bed now and am going to try and tackle the rest of this!

Quote:

Originally Posted by reef-keeper (Post 786526)
Awesome where did you buy the LEDs and drivers?

I got the LEDs from LEDGroupbuy.com , which is run by Milad here on the forum. Great guy!

I got the power supply and drivers from Mouser. There are much cheaper places to buy the drivers but everywhere is sold out of them (like sold out worldwide). Since I'm under a time crunch (PhD and business are going insane right now) I pulled the trigger on the Mouser order and paid 2x the price (still reasonable though).

Quote:

Originally Posted by daplatapus (Post 786544)
That looks awesome so far! Great job. Hmmm, might need to get ya to make me a cover ... :D
My LDD's are supposed to leave China today (fingers crossed).
Are you going to power your Typhon with the same power supply as the LED's? How have you planned to step down the V's?

Depending how big of a cover you need, I'll machine one up for you. My little CNC mill at home has limited space and the big mill at work is down for the count right now (and for the foreseeable future). Sketch it up and we'll talk.

Right now I have a separate 12V power supply that is powering the controller. When I find some time to track down a 24-to-12V DC/DC step down I'll use that to drop the main PSU voltage to 12V to power both the controller and fans. For now I'm just going to put two fans in series to drop the 24V.

ScubaSteve 06-06-2013 05:59 AM

Holy mackerel, what the heck happened? I woke up and it’s frickin’ June! Time flies when you’re doing a PhD and having… errr… fun?
Well, I guess I should finish up this build thread considering the tank has been rockin’ for 6 months! Where were we? Right! Buttons!

Buttons

So, my biggest pet peeve about the Typhon controller is that the buttons don’t come up to the same height as the screen. This is a pretty half-baked mistake if you ask me. If you want to panel mount the controller to make your DIY project look, you know, not ghetto, you have to make button extenders. Luckily, I’ve got a 3D printer at my disposal, so custom button extenders for me! Yay!

http://i927.photobucket.com/albums/a...psaaf41a38.jpg

Here we are finishing up the print on the first button extender. I basically designed these to fit over the Typhon buttons as a sleeve and with a shoulder at the top so that they wouldn’t slip out of the holes I drilled in the lid. They get sandwiched between the buttons and lid giving a nice, solid feel.

http://i927.photobucket.com/albums/a...psf6d29217.jpg

Here’s the lid assembled with the controller and button extenders in place. They feel way better than I expected.

http://i927.photobucket.com/albums/a...ps62371447.jpg

… and another view…

http://i927.photobucket.com/albums/a...ps980312fd.jpg

… and another.

Control Enclosure

To minimize the number of wires running from the controller to the Biocube hood, I opted to use 2 8x22 AWG cables that fit in nicely where the two original cables for the PCs ran into the hood. I opted to use some sexy 8-pin DIN connecters:

http://i927.photobucket.com/albums/a...ps9feee8ac.jpg

These connectors are great in that the male and female ends thread together to avoid being pulled apart and to keep them moderately waterproof. However, I couldn’t find any female panel mount connectors in town, so I just went with male panel mounts. This is not ideal because the live pins are all exposed, so be careful if the controller is plugged in but the cables are unplugged!

So, time to start putting this work of beauty together!

I mounted the controller, driver board and power supply to the enclosure with 10mm countersunk M3 screws (forgot to take a picture of this). Here it is all populated:

http://i927.photobucket.com/albums/a...ps6b6462b4.jpg

Button her up and…. Voila!

http://i927.photobucket.com/albums/a...ps21158776.jpg

Damn fine piece of work if I don’t say so myself!


The Power Compact Massacre (or How I Start To Love LEDs)


So, after pulling the hood apart a bit, this is what we were starting with:
http://i927.photobucket.com/albums/a...ps4aa3c924.jpg

Time to give’r ****! A few minutes of ruthless butchering later and the thing was gutted. Don’t break any of the plastic bosses as you are taking things apart! You need these to screw your heat sink down. If you do manage to break one, a little epoxy works miracles.

Conveniently, the heat sink fit in there like a glove. Just to recap, I used 1” - #5 wood screws to bolt the heat sink down. Here it is screwed in place:

http://i927.photobucket.com/albums/a...ps23a70885.jpg

I have two 12V 60 mm low-profile case fans epoxied together side-by-side and wired in series placed at one end of the heat sink. I have them mounted to the hood with double-sided foam tape to minimize vibrations. These things move some serious air! I kept the two 40 mm case fans that the biocube uses to pull in and extract air (I upgraded to new fans as the old ones were noisy as ****).

The protoboard you see there is one of several failed attempts to use a signal from the LEDs to turn on the fans. Transistors, optoisolators, low-pass filters, you name it… All attempts were foiled by how the Meanwell drivers work (I won’t go into it). It’s easier to have a dedicated PWM signal from your controller or just use the existing buttons on the top of the hood to control the fans. Seeing as how all my PWM channels were dedicated to my LEDs, I gave up and went with the latter. Oh well, I’ll come up with a nifty solution one day when I have some free time.

One thing that I see constantly in Biocube LED conversions is people taking out all the reflectors. I don’t get that. It looks sloppy because you see all the wiring and, while a minimal contribution to overall light, it does reflect light back down into the tank. Might not be much but it’s worth keeping them for looks alone. I notched the reflector a bit to fit the 60 mm fans and put it all together.

http://i927.photobucket.com/albums/a...psb967e566.jpg

Lookin’ spiffy!

Another view, including a bit of the gong show that was my living room:
http://i927.photobucket.com/albums/a...ps7f89ce8d.jpg
So…. The million dollar question: Does it work?
http://i927.photobucket.com/albums/a...psf1f7870b.jpg

Holy ****, my eyes!

Seriously, I was seeing spots for a good hour after which led to a tragic face-to-door-frame incident – several beers and it being 2am at the time may have also contributed to this. Tough to say.

It’s not actually as purple/blue as it looks here. It’s actually just so bright that my iPhone is freaking out. It’s a very nice, intense white that is pretty close to what my 250W Phoenix halide looks like over my big tank. I’m impressed!

So, what does it look like over the tank?

Pretty… freakn’… sweet!

http://i927.photobucket.com/albums/a...ps739127ff.jpg

Corals fluoresce like mad and the colours on the fish render to be extremely vivid. It’s making me really want to switch the big tank over! Again, it’s not actually as purple/blue as the camera makes it looks. It’s a very intense white.

The OCW LEDs really make a big difference in terms of tweaking the colour temperature, in particular the green and turquoise. They really add some warm to the overall balance and give it a more natural feel. The red is necessary to temper the blues and greens, though I wish I had individual control over the reds. I find that the red can sometimes be too much while the green and turquoise are lacking. I found a happy medium but I wish I could separate that channel a bit.

Job Done! High fives all around!

ScubaSteve 06-06-2013 06:16 AM

So, several months out now, how’s the tank doing?

Awesome! Just, totally awesome.

I’ve opted to go SPS in this tank with a few high end palys and lobos. I was also given a super awesome clam by a buddy (Thank Jon!). All are doing really well. In fact, the SPS in this tank probably looking better than my big tank! I moved a few pieces from the big tank into the biocube and it’s incredible! I had a bonsai colony that all but shut down and was starting to look pretty sad (wasn’t getting enough light). Give it a front row, center spot under the LEDs and it’s going bananas! A friend of mine snapped this pic a few weeks back just before the lights went out. This was basically under just the TV LEDs with a touch of the RBs (and a bit of orange glow from the lights in the living room):

http://i927.photobucket.com/albums/a...sb0a3df78.jpeg

Pretty snazzy, no?

I also got a brown frag from my clam donor when he was shutting down his tank. I knew it was a milli or something similar but it was small, brown and hanging on for dear life. I gave it a prime spot in the tank and left it for two week (I actually forgot I put it in there because I was so busy with work). I checked on it randomly one morning and what do I see? A freakin’ Red Planet with crazy electric green and mind blowing reds! What the heck? Not only has the thing coloured up super nice, it’s growing like a freaking weed! It’s encrusted and putting out new branches faster than I can count. I also put a tiny A. tenuis branch in there that suddenly exploded into a bushy colony the size of a racquet ball. Nice!

Bare in mind, the only filtration this tank has is a piece of filter floss and it gets water changes from the water I pull out of my big tank (when I remember). Nothing else. By having tons of light and limiting the amount I feed the fish in the tank, all the SPS look like champs! To be honest, I don’t even know what the parameters are in the tank. This is the lowest maintenance tank I’ve ever had and it’s getting better results from my carbon-dosed, GFO/skimmer/kalk top off SPS tank that gets a ton of love. Go figure, huh?

I will try to get more pics up when I get my friend to come back with his camera. The LEDs mess with my camera too much to get a picture of anything other than blue. I promise they’ll come soon!


All times are GMT. The time now is 10:15 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.