Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Buy/Sell/Trade (Aquatics hardware related only) (http://www.canreef.com/vbulletin/forumdisplay.php?f=31)
-   -   WTB: All sorts of different equipment (lighting, skimmer, etc) (http://www.canreef.com/vbulletin/showthread.php?t=40697)

Myka 03-24-2008 01:10 AM

WTB: All sorts of different equipment (lighting, skimmer, etc)
 
Looking for:

~ 250w PFO HQI ballast
~ 24" Tek T5 Retrofit; dual or single bulb. Would consider a fixture instead of the retrofit.
~ Lumenarc reflector
~ Refractometer
~ EuroReef RS100 skimmer or equivalent
~ 24" tank, at least 25 gallons. Use for a sump. Or a 24" sump/fuge combo. Local pick up only.


Aside from the sump, I'll pay shipping on other items. :)


Please check back as I will likely add to this! :biggrin:

Myka 03-24-2008 05:17 PM

Bump. Updated. :)

Der_Iron_Chef 03-24-2008 05:25 PM

I purchased a big container of the Warner Marine PHOSaR (500mg) and used about half a cup of it...before switching to ZEOvit. If you're still looking for the media, I'd be looking to sell it :)

Myka 03-24-2008 06:06 PM

Der Iron Chef: PMed.

Myka 03-29-2008 08:28 PM

Updated. :)

Myka 04-26-2008 06:48 PM

Updated again. :D

Myka 04-30-2008 03:51 AM

I need that sump pump asap...

Myka 05-01-2008 02:36 AM

La tee da...

spoot 05-01-2008 03:35 AM

I've got a Little giant pump 2M-D, any interest?
The impeller and shaft are brand new. I didn't get a drilled sump so I needed a submersible pump.

http://www.lgpc.com/Product/ItemDeta...?ProductID=854

Myka 05-01-2008 02:19 PM

Yes, I am. I just emailed Little Giant to find out the flow rate at 4' head pressure. Since it's not designed specifically for aquariums, it only lists the flow at 1' head pressure. I'm thinking it will work out perfectly.

I PMed you. :)

Drock169 05-01-2008 03:16 PM

I have diamond saw blades for a hand saw, but not the diamond saw blade disks

Myka 05-02-2008 01:39 AM

I'm looking for diamon hole saws to drill holes for bulkheads. :)

banditpowdercoat 05-02-2008 08:21 AM

WHat size hole saws? I have a 45mm and 50mm here. Going to be using the 45mm for 1 maybe 2 holes on my new sump here soon. Then Im done. I acctually got them off ebay for like $20 for the pair or something like that.

I have a old 18g tank too. Has one tiny(1/4") crack on one edge. I siliconed it, and ran the tank for another 18 months as my FW tank before I upgraded to a 30g, so it holds water fine and didnt escalate. To big for under my SW tank 22 x 12 x 14 I think size is???

And a MAG 18 I know too big LOL

Myka 05-02-2008 02:16 PM

I just placed an order to Bulk Reef Supply for some bits (and other stuff). I should update this thread. Bummer! Just a tad too late... :(

*Updated*

Myka 05-05-2008 01:45 AM

La dee da. See original post...it's updated. :)


All times are GMT. The time now is 06:14 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.