FS light, pumps, skimmer, carbon reactor etc YYC
 

Was going to set up a 150 but have decided not to so I am selling off some equipment that I had gathered for it. Most has been gently used by previous owners (except the light - that's never been used before)

1) **new** kessil A360W-E Tuna Blue (I plugged it in once to make sure it worked, its never been used or hung) - $430
2) Bubble King Mini 160 Skimmer – used by previous owner – pump works fine. I think its a G2 - $350
3) Reefkeeper elite V2 controller with Net (internet controller), SL1 modules (for temp/ph/orp probe), APC (add-on) for pump control, 3 power bars (one bar add-on), and temp, ph and orp (oxidation redux) probes. Used by previous owner, i haven’t used it. - $700
4) 2 Tunze Stream 6065 (1700 GPH) - $80 each
5) BRS dual carbon/GFO reactor with pump, small leak where line joins the system, but if its sitting in a sump it doesn’t matter much. $50

Also have some heaters and pumps. Will add when I get home.

Pickup in Elbow Valley (west of discovery ridge)
Text 403-540-5430 for faster responses.

Is the leak on the reactor coming from the 1/2" push connect fitting?

Yes. The little white elbow thing.

text sent

Bump

are you willing to ship?

At the moment I am not willing to ship.

Was going to set up a 150 but have decided not to so I am selling off some equipment that I had gathered for it. Most has been gently used by previous owners (except the light - that's never been used before)

1) **new** kessil A360W-E Tuna Blue (I plugged it in once to make sure it worked, its never been used or hung) - $430 Pending
2) Bubble King Mini 160 Skimmer – used by previous owner – pump works fine. I think its a G2 - $350
3) Reefkeeper elite V2 controller with Net (internet controller), SL1 modules (for temp/ph/orp probe), APC (add-on) for pump control, 3 power bars (one bar add-on), and temp, ph and orp (oxidation redux) probes. Used by previous owner, i haven’t used it. - $700
4) 2 Tunze Stream 6065 (1700 GPH) - $80 each
5) BRS dual carbon/GFO reactor with pump, small leak where line joins the system, but if its sitting in a sump it doesn’t matter much. $50

Also have some heaters and pumps. Will add when I get home.

Pickup in Elbow Valley (west of discovery ridge)
Text 403-540-5430 for faster responses.

New prices and items:
1) **new** kessil A360W-E Tuna Blue (I plugged it in once to make sure it worked, its never been used or hung) - $430 Pending
2) Bubble King Mini 160 Skimmer – used by previous owner – pump works fine. I think its a G2 - $300
3) Reefkeeper elite V2 controller with Net (internet controller), SL1 modules (for temp/ph/orp probe), APC (add-on) for pump control, 3 power bars (one bar add-on), and temp, ph and orp (oxidation redux) probes. Used by previous owner, i haven’t used it. - $600
4) 2 Tunze Stream 6065 (1700 GPH) - $80 each
5) BRS dual carbon/GFO reactor with pump, small leak where line joins the system, but if its sitting in a sump it doesn’t matter much. $40
6) 300W Eheim Jager Heater - $30
7) JBJ ATO with floats (and a brand new still-in-the-box aqualifter) - $65

Pickup in Elbow Valley (west of discovery ridge) or at YYC Municipal Building (during lunch hours Mon-Fri)

Text 403-540-5430 for faster responses.

Can you let us know if you do decide to ship?

I will let you know.

Hi. Do you have a picture of the skimmer?

1) **new** kessil A360W-E Tuna Blue (I plugged it in once to make sure it worked, its never been used or hung) - $430 SOLD
2) Bubble King Mini 160 Skimmer – used by previous owner – pump works fine. I think its a G2 - $300
3) Reefkeeper elite V2 controller with Net (internet controller), SL1 modules (for temp/ph/orp probe), APC (add-on) for pump control, 3 power bars (one bar add-on), and temp, ph and orp (oxidation redux) probes. Used by previous owner, i haven’t used it. - $600
4) 2 Tunze Stream 6065 (1700 GPH) - $80 each
5) BRS dual carbon/GFO reactor with pump, small leak where line joins the system, but if its sitting in a sump it doesn’t matter much. $40
6) 300W Eheim Jager Heater - $30
7) JBJ ATO with floats (and a brand new still-in-the-box aqualifter) - $65

Pickup in Elbow Valley (west of discovery ridge) or at YYC Municipal Building (during lunch hours Mon-Fri)

Text 403-540-5430 for faster responses.

Bump.

Tested the controller and probes. Works fine - have a video if proof required.

Skimmer not for sale. I went and broke it :(

How so? Fixable?

Body separated from the base. probably fixable with silicone. Pump not as strong as it should be. Opened it up and couldn't find any noticeable broken bits.

Have you changed your mind on shipping?

I suppose it depends on what/where its being shipped.

pm'd