Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Tank Journal (http://www.canreef.com/vbulletin/forumdisplay.php?f=18)
-   -   Proteus' Shallow reef build (http://www.canreef.com/vbulletin/showthread.php?t=95824)

Proteus 03-17-2013 04:54 PM

Proteus' Shallow reef build
 
I've been planning this build for about 6 months. I alway like the look down appeal. This will be a slow build as its all from scratch except livestock

I build the stand and skinned in the last couple days and built the tank the other night. Just waiting for overflow glass to be cut. Should be done Monday.

And tips and pointers are very welcome

The tank is 24x24x12 external overflow. Returns are 6" down using directional bulk heads. Plumbing will start next week. And painting and finishing stand. I have a 20x20 cube to use as sump but need to build still

Equipment to be used is
Radion gen 1
Mce 600 (until omega 125 is released)
MR1 reactor
Dc return pump to be bought yet
Check valves and gates for plumbing

http://i1217.photobucket.com/albums/...E76FF3731B.jpg
http://i1217.photobucket.com/albums/...E77A055D76.jpg
http://i1217.photobucket.com/albums/...E7C1479A4E.jpg
http://i1217.photobucket.com/albums/...E79745C21B.jpg
http://i1217.photobucket.com/albums/...E83DA70707.jpg
http://i1217.photobucket.com/albums/...E8DF3F1AC6.jpg
http://i1217.photobucket.com/albums/...4FF9B3EFBD.jpg

lastlight 03-17-2013 04:57 PM

looks great so far. what are you doing to deal with 24x24x6 worth of back-siphon assuming those are on your sump returns?

Proteus 03-17-2013 05:14 PM

In event of power failer I am installing check valves. I using a George fisher check valve. Also oversize sump with the possibility of external overflow tank. Depending on sump capacity

http://www.bulkreefsupply.com/george...k-valve-1.html

Zoaelite 03-17-2013 05:15 PM

Survey says: Backflow valve!?

Subscribed, this reminds me of another tank on here :razz:.

Proteus 03-17-2013 05:16 PM

Quote:

Originally Posted by Zoaelite (Post 803278)
Survey says: Backflow valve!?

Subscribed, this reminds me of another tank on here :razz:.

Your current tank has given me a lot of inspiration.


Would like to give thanks to concept who provide and cut the glass

Thank you

Phil 03-18-2013 04:04 AM

i got some trim and paint left if u want it. looks good by the way. and magnets.

Proteus 03-18-2013 04:14 AM

Thanks Phil.
I was going to put trim on this weekend and I just finished with a mahogany stain.

I used stove bolts on the two side pannels
The front is on magnets. Figured easy way to go.

kien 03-18-2013 04:53 AM

:pop2:

Goatman 03-18-2013 05:39 AM

http://www.smileyvault.com/albums/us...49/popcorn.gif

Phil 03-18-2013 05:40 AM

Quote:

Originally Posted by kien (Post 803498)
:pop2:

U guys are going to get popcorn lung


All times are GMT. The time now is 11:31 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.