Canreef Aquatics Bulletin Board - anybody using the jebao wp 40 or 25's

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)

- - anybody using the jebao wp 40 or 25's (http://www.canreef.com/vbulletin/showthread.php?t=98560)

can they hook up like a mp10

how does a mp10 hook up like??

The pump is inside the tank, no part is outside.

Quote:

Originally Posted by donkey77 (Post 827717)

can they hook up like a mp10

Quote:

Originally Posted by neoh (Post 827026)

I just picked up a second wp40 for my 77g long. One for random, one for wave. So far - I like it. I just wish it was stronger! :lol:

I have a 160 and on elisa after a few days there is no sand in the corner of my tank and you want two on a 70 gal . Your rocks are going to start falling over you must be bair bottem .

Just received two 40's last week, and they are amazing so far. 140 for both plus shipping. Only mistake was to not order the variable controller as two of them are way too much water movement for my 160 gallon. I've since ordered, should be getting them in 1 week. As far as noise, they are way quieter than the vortech 25's when they were cranked. Highly recommend this product.

I might add that the light sensor that is supposed to reduce the speed when light is turned down doesn't really work for me. If completely dark the powerheads run at full speed.

Did you plug in the little thingy? if not then the night mode will not be active.

Also they say it is only to be with low output light. Now who's going to be able to use that??? since that include LED, MH and T5HO, the only light that can be used with this feature is probably power compact.

Pretty useless I think. On the other end, if you have a controller, you could use what ever force you want and what ever pattern you want with them. I dim them at night so I get like a reef crest mode but much lower in flow.

Quote:

Originally Posted by markjameslucas (Post 827881)

can't you put something over the light thing so its not so bright, like a semi transperent box or something

Yeah, I plugged that little module in. It's a litte weird though. In dim light, I believe it's supposed to work in a less powerful state, but completely black, it runs at full blast. Shouldn't it work when there are no lights on, it's in night mode, or less powerful? I just got an email saying today they've changed the controller so W1 can run in 50% or 75%, so you wouldn't need a variable power module.

Quote:

Originally Posted by daniella3d (Post 827905)

Quote:

Originally Posted by donkey77 (Post 828045)

can't you put something over the light thing so its not so bright, like a semi transperent box or something

It's actually the opposite. :neutral:
it needs more light, or it runs at full blast.

Well they warn about using this feature with high output ligth will break it, so I am guessing unless you have very low lights like power compact, that your night mode is broken already. They mention that it is never to be used with high output lights or it might break.

I think it's just totally USELESS.

If you don't have an aquarium controller, maybe you should get one and control your pump through it. Or maybe get the Jebao power supply with different voltage and switch it to a less powerful voltage?

Quote:

Originally Posted by markjameslucas (Post 828055)

It's actually the opposite. :neutral:
it needs more light, or it runs at full blast.

I got an update email from fish street about new controller with new modes with reduced flow

Here's a link to the new controller.
http://www.fish-street.com/jebao_wp-..._category_id=0