now thats impressive and original thinking. Brilliant work Kari.

Very Nice. Love the design. Looks even better in pictures then it did in design

J

Is that 3.9L of Zeovit it will hold, or 3.9L total chamber volume? Why not even holes throughout the entire space of the "plates"? Is it designed to just rotate it forward, then rotate it back right away...or rotate it forward one day, then next day rotate it back? Or whatever you want? :lol:

Looks FAN-TAS-TIC!!! Sign me up! :)

3.9liter media section (between the drilled plates). Or was it 3.7liter. I'll measure it again once I'm awake.

The theory on hole placement was for horizontal mount. It should help the water flow thru the media instead of short cutting above it.

I don't think it will need to rotate much. Just a quick back and fourth to move the media around. Speaking of media, I'll need to go buy a few bags to test. My guess is that it will work better in the vertical position.

Good call!!

Anyone find a source for Sedra pumps? What's the price on those puppies anyway?

Fantastic looking prototype... expected nothing less from you though, Kari. :wink:

Wendell sells Sedra pumps: http://oceanaquatics.com/store/categ...-%26-External/

Having said that is there a reason to go Sedra over anything else? They're just a pump. The Hydor Seltz pumps are smaller and draw less power for example:

Sedra 5000 - 500gph - 50W
Seltz L35 - 450gph - 23W

Sedra 2500 - 250gph - 25W
Seltz L25 - 265gph - 10W

(Anyhow, just a thought.. :) )

Wow Kari that is dang impressive!! :eek: Beautiful work!

I was just wondering what the length of that bracket it sits on is. Trying to figure if it will fit into my sump cabinet :biggrin:

I am in for one, pending getting another job :)

as soon as i am employed again i want one.

Did some measuring on the tester reactor and it works out to 3.50 liter media capacity and not what I guessed earlier.

The hanger bracket is 18" long and the reactor extends 8" out from the wall when it is mounted. I beleave it can be shortened by at least 2" and still have the same capacity but I would like to see the fittings first (still on order.) So, say 16" long.

I can make them between 5 liters and as small as you need by changing the length. It will be 0.389 liters per 1" length change.

This liters and inches thing is cool. Whatever, just units.