Ah something seems to be up with Tapatalk. My replies to quotes don't seem to be working.

Anyways, glad I'm not the only one that had some issues with the atk.

Tested my water again tonight.


Phos - 0
pH 8.0
Ammonia 0
Nitrite 5.0
Nitrate 10

Hopefully it won't be too much longer before I can move over my few remaining corals from my 10 gallon.

Haven't been following your build closely, but just saw what you posted ...

Nitrites 5.0
Nitrates 10.0

Your tank is empty right now, yes? If so you are on the right path. Whatever you have been doing to add ammonia needs to be stopped and you need to see the Nitrites drop.
Hopefully when the NO2 drops the NO3 will also drop.
Ideally, when the NO2 goes away, the NO3 will come down/go away too.

Sorry I haven't been following your build. I gather you're getting ready to add critters?

If you can keep adding your Ammonia product without your NO2 showing up, and without seeing any significant NO3, you can keep it up until you are ready to start adding critters.

Yep tank is empty. Just rocks and sand.

I stopped feeding the tank with mysis shrimp a week ago while waiting for the cycle to complete.

Not in a huge hurry to add critters. Mostly want to move my kenya tree and gsp coral to the 75 gallon so I can start turning the 10 gallon into a sort of quarantine tank. I figure I have a few more weeks to wait before adding a cleanup crew of any sort.

What I was getting at is for you to keep adding small amounts of ammonia producing stuff to keep the bacteria levels up enough so when you add critters/fish you don't go through much of a cycle

Ah. I misunderstood. I had read that once ammonia is gone and you start to see nitrites and nitrates that you should stop feeding the tank.

It does make sense to continue to feed it a bit every few days to make sure the bacteria that has grown doesn't die.

Came back from being away all weekend to a diatom bloom. Cycle seems to be coming along nicely.

Hopefully next weekend I will be able to add some clean up crew.https://uploads.tapatalk-cdn.com/201...177b43c013.jpg

Sent from my Nexus 6 using Tapatalk

Looking good, i like the rockwork.

Thanks. I still might add a bit to it later on to make it taller with some more overhangs.

I have run into some issues. Seems like the lid to my ATO reservoir doesn't close tightly since I have the power cable to the pump that goes under the lid. This is causing water to leak out when the ATO is running. Gets in between the container and the lid and then runs down the side and I have a small puddle on the bottom of my stand.

So I either have to get a new reservoir or I may be able to drill another hole through the top of the lid and put the power cable through that. Hopefully that will work.

The other night I drilled a hole I the top of my ATO reservoir to put the power cable for the pump through. That seems to have helped with the water leaking. The lid closes fully now and no more water in my stand!https://uploads.tapatalk-cdn.com/201...0cb94d57bf.jpg

Sent from my Nexus 6 using Tapatalk

The diatom bloom I had left just as quickly as it came. Now back to white sand and rocks.

Haven't had a chance to test my water this week, so not sure where I am in the cycle, but hopefully it's almost complete.https://uploads.tapatalk-cdn.com/201...3793316800.jpg

Sent from my Nexus 6 using Tapatalk