Man developing the basement is taking forever! I finally had time to put in the floor drain, build the sump stand, and silicone the overflow back on. I won't likely get a chance to plumb it before I go back to work but we shall see what happens on monday!

Rigging to hold over flow in place while silicone dried.
http://www.lithicimages.com/photos/i...-jr2Tts4-L.jpg

General arrangement. The floor drain will have the water change valve and emergency overflow plumbed directly to it.
http://www.lithicimages.com/photos/i...-82knJRQ-L.jpg

http://www.lithicimages.com/photos/i...-RhGfsGb-L.jpg
I will try to describe the flow of water through the sumps. You can see the primary frag chamber top left, return pump chamber top middle, and overflow top right. The skimmer chamber is bottom right, filter basket chamber bottom middle, return pump chamber bottom left, refugium bottom far left.

The refugium will be fed off a manifold powered by the lower sumps return pump. The manifold will also feed a couple reactors for bio pellets and GFO.

Slowly but surely it's coming together.

I just picked up these beauties! Avast Marine Works MR5 & MR10 media reactors, a Mutiny II ozone reactor, and the Kraken!

MR5
http://www.avastmarine.com/ssc/image.../mr5_18_md.png

MR10
http://www.avastmarine.com/ssc/image...mr10_18_md.png

Mutiny II
http://www.avastmarine.com/ssc/image..._series_md.png

The Kraken
http://www.avastmarine.com/ssc/image.../kraken_md.png

The MR5 is for GFO, the Mutiny II will drain it's effluent into the MR10 which will be packed with GAC. The Kraken is a biopellet reactor I plan on running. I still need to chose which biopellets to run, as well as which ozone generator/air dryer/pump to use. Any suggestions?

I'm pretty stoked though!

Looking good Scott, coming together nicely.

Thanks Steve, I am really excited to put your concept/design into action! I'm just trying to make sure the parts I buy are of a high enough quality that I shouldn't have to replace them in a couple years. With proper maintenance they should last as long as the system is up I hope.

Are you going to upgrade your Mitras' to the new LED configuration? I haven't given it much thought, as it's another $900.

Nope, seems rather pointless for that kind of money. I might consider it the new version if I was buying new fixtures but upgrading all clusters for a couple more white LEDs in place of the red and yellow won't make a difference IMO. I don't run the whites full as it is so adding more won't really add any more light in my case. Even though the new LEDs names seem to suggest they are more of a blue white I'm still not convinced. Plus the yellow is nice for making orange sunrises and the extra red spectrum seems to have value as well. So between the two I'm still leaning towards the original.

I am hoping someone puts out a comparison of both systems running. I tend to agree with your colour preferences though. I run KZ Fiji purple and 10K's more than super blues on my current T5 systems.

I agree with you there. I've only got my cool whites at 50% and don't want anymore white. Not unless they give me more rb, b and hv lol.

Suspended ceiling is in. I am happy with how it turned out!

http://www.lithicimages.com/photos/i...DSC_3929-L.jpg

http://www.lithicimages.com/photos/i...DSC_3930-L.jpg

http://www.lithicimages.com/photos/i...DSC_3931-L.jpg

http://www.lithicimages.com/photos/i...DSC_3932-L.jpg

Not really tank update per say but I got the wallpaper feature wall done today and the tile guy is coming tuesday/wednesday.

I am also picking up ~8' of 2" spaflex up tomorrow and rigging the tank to the sumps. Maybe plumb the durso's.

http://www.lithicimages.com/photos/i...DSC_3933-L.jpg

http://www.lithicimages.com/photos/i...DSC_3940-L.jpg

http://www.lithicimages.com/photos/i...DSC_3942-L.jpg