Originally Posted by lastlight (Post 633850)

Thanks to Brad (Abcha0s) for suggesting this 100% epoxy floor coating. It's called Enviropoxy (from IPP here in Calgary) and I have done the first coat. I'll be doing a second coat so all the higher spots in my floor become smooth as well. Hard as a rock and not slippery when wet either. Love this stuff but the prep-work for the floor was brutal.

http://www.fishbrains.net/images/404/enviro1.jpg

http://www.fishbrains.net/images/404/enviro2.jpg

The stand is done except for the doors now. The scribing process was pretty painstaking but I'm really happy with the end result. I have to go back and carefully touch up the paint in a few grooves still...

http://www.fishbrains.net/images/404/enviro3.jpg

http://www.fishbrains.net/images/404/enviro4.jpg

My helper playing in the 'secret tunnel'...

http://www.fishbrains.net/images/404/enviro5.jpg

Not a very flattering shot as the harsh lights down here right now show a few seams. You can just make out something in the groove for the left vertical line. On this panel as luck would have it I hit ALL FOUR screws that were used to mount the panel originally. I didn't want to try and move them and screw things up but nobody but me will notice I think.

http://www.fishbrains.net/images/404/enviro6.jpg

http://www.fishbrains.net/images/404/enviro7.jpg

http://www.fishbrains.net/images/404/enviro8.jpg

Originally Posted by Lampshade (Post 633863)

Wow, the scribing cuts looks really good. Great choice going with those. Looks like you have your first livestock in the tank as well, that spider looks happily content until he's flooded.