Canreef Aquatics Bulletin Board - VDM and tunze 6055 setup

Page 2 of 2

Show 40 post(s) from this thread on one page

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)

- - VDM and tunze 6055 setup (http://www.canreef.com/vbulletin/showthread.php?t=92913)

windcoast reefs

12-27-2012 06:49 PM

Quote:

Originally Posted by Aquattro (Post 776892)

If you unplug the cable to the VDM they should be on 100%..right?

Yup, but when they are plugged in they just pulse every 30 seconds for 1 second. Can't manually turn them off, they just pulse. Then I unplug it and they go back to 100%, another project for after work I guess!

Aquattro

12-27-2012 06:50 PM

Also, if you have them plugged into the power bar, make sure the outlets are turned on.

Aquattro

12-27-2012 06:51 PM

Quote:

Originally Posted by windcoast reefs (Post 776893)

Mine do that in feed mode, not sure why, I haven't looked at it yet. But that tells me the outlet isn't firing properly. Likely just a syntax error..

windcoast reefs

12-27-2012 06:52 PM

Quote:

Originally Posted by Aquattro (Post 776894)

Also, if you have them plugged into the power bar, make sure the outlets are turned on.

Yup the outlets are on, tested them with a lamp. Just ordered another cable, needed it anyways for another set of pumps. Then I can narrow down the problem

windcoast reefs

12-27-2012 06:53 PM

Quote:

Originally Posted by Aquattro (Post 776895)

Mine do that in feed mode, not sure why, I haven't looked at it yet. But that tells me the outlet isn't firing properly. Likely just a syntax error..

Okay I'll post my code after work and see if that's the problem.

All times are GMT. The time now is 12:38 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page