Got Rods
 

I drove to Kelowna this morning and picked up about 14 feet of 3/8" acrylic rod and a small sheet of acrylic from IPP. The rods were super cheap but the acrylic sheet on the other hand was a bit pricy. Tomorrow I'm going to attempt to build some towers. I'll post some pics of the process and the results.

Chad

Aquascape
 

So here is what I came up with. I had some problems with the large shelf piece as it was too heavy. I ended up having to use 5/8" PVC inserted into a piece of acrylic with a 5/8" hole drilled in it. I then glued the PVC to the acrylic sheet. Also, I drilled 5/8" holes through a heavy rock to use as the base and through all the small rocks and threaded them on until they were almost all the way to the top. I drilled a shallow 5/8" hole in the shelf and placed it on. I then used some epoxy to level the bottom rock so it would not wobble and used epoxy to steady the shelf piece.

For the small tower on the right I drilled a 3/8" hole in the bottom of the rock and placed it on a 3/8" acrylic rod connected to a piece of acrylic. I then drilled a 3/8" hole in the top of the rock and the bottom of the larger rock. I then just stuck them together using a 3/8" rod. I still need to use some epoxy to stabilize the bottom rock.

https://lh4.googleusercontent.com/-2.../Aquascape.jpg

Chad

i have a bunch left over from when I did my build, pm me if you need some