works better than "aquarium" version of crazy glue?? or they are exactly the same?

My personnal favorite is mercuyadhesives brand it comes in differnent size containers as well as differing viscosities ( I like thick). It is available from hobbyshops, the one beside big als in calgary carries a full selection. It is another cyanoacrylate based glue to look at.

I actually threw my tailored aquatics in the garbage, I have always used the locktite because of there applicator. The TA tip gets covered in glue and becomes irritating to use after one application while the locktite stays nice and clean.

I tried the expensive brands of superglue and aquarium specific epoxy putties, but i can give you a cheap alternative that works perfectly. Get yourself some PC Marine Epoxy Putty from Rona at about $9 and a cheap tube of super glue gel from the dollar store (the local one has Titan brand).

I read about this on Reef Central and can say it has worked form me every time. Mix up your epoxy putty (PC Marine Putty is green on the outside and white on the inside and is one uniform colour when you knead it) and roll a small ball about the size of a pea. Dry the bottom of your frag or plug and put a drop of superglue on the bottom. Put your ball of epoxy on the drop of superglue and then put another drop on top of the epoxy.

Push the whole thing down where ever you want it mounted - liverock, glass or overflow. The superglue sticks to both the epoxy and to the rock and is very strong once everything cures - it will support horzontally mounted frags.

This works much better than superglue or epoxy alone.

I got the same experience with the tailored aquatics. I hate it

I have been using the Gorilla Glue brand. The applicator tip doesn't get plugged and you get twice as much as Loctite or Crazy Glue.

I've used gorilla glue before in my tank, it's a polyurethane so technically it should be inert once cured. Only issue is that it's only a mechanical bond, so doesn't do to well on smooth surfaces. I just used a locktite on a motor impeller while i wait for the replacment part from tunze. The magnet slipped off the ceramic holding the blades. So far it's worked great, and my fish are still alive!. might not need that replacment part after all...

this, the loctite is what i have been using, cures great underwater, you only have so much to play around with it though, the gel is nice to for filling in any holes you need to attatch to!

Also great for binding your fingers with other fingers, random refractometers and about anything else that exists on the planet.

I didn't know gorilla glue could be used to glue frags. How long does it take for the glue to set? Can this be used under water? If this really works then I'll be buying some for sure. I have tried Loctite glue and while it works great it is also more epxensive. The bottle is a lot smaller than the reef glue fish stores sell.