Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   DIY (http://www.canreef.com/vbulletin/forumdisplay.php?f=13)
-   -   diy calcium reactor (http://www.canreef.com/vbulletin/showthread.php?t=62909)

eli@fijireefrock.com 04-09-2010 03:21 AM

i placed the order for a 6' long 6" diameter acrylic pipe.
cant wait to receive it next week Tuesday
to start building :smile: a 24" tall reactor.

donlite 04-09-2010 03:49 PM

Reactor
 
When you get the pipe you also should look at buying the glue at the same time maybe "Acrylic 16". You need to able to open and close the one end.
How are doing this?:question:

eli@fijireefrock.com 04-12-2010 09:38 PM

i just received the tube and i got weldon 16. excited.
i will post photos maybe later this evening for the plumbing parts.

belzebuth 04-12-2010 09:47 PM

Tagging along:lol:

donlite 04-12-2010 10:03 PM

cutting
 
You must be very careful when cutting the acrylic tube. Do not let it get hot as this can cause micro fishers. It is also important to make sure the joints you are connecting are clean and straight. Good Luck, Don

eli@fijireefrock.com 04-13-2010 08:19 AM

well here are some photos
i used 4" pvc fittings
heres the mess i made cutting and gluing the acrilic
http://i726.photobucket.com/albums/w...DSCN0316-1.jpg

its 30" tall reactor
http://i726.photobucket.com/albums/w...f/DSCN0311.jpg
this is the top end intake to the pump 1/2" fitting glued in
http://i726.photobucket.com/albums/w...f/DSCN0314.jpg
this is the opening above the outlet of the pump and perforated acrylic where the media will rest
http://i726.photobucket.com/albums/w...f/DSCN0315.jpg
this is the bottem end where it connects to the pump
there are 2 1/4" fittings on the intake of the pump one for the fresh tank water the other from the drip cup of the CO2.
one 1/4" fitting drilled on the outlet of the pump pushing reactor water to the tank
http://i726.photobucket.com/albums/w...f/DSCN0313.jpg
just a random photo of the seat for the media
http://i726.photobucket.com/albums/w...f/DSCN0308.jpg
ok its 2:30 in the morning i should go to bed.

donlite 04-13-2010 02:34 PM

Looks good. Hopefully the needles where for the glue:lol:

eli@fijireefrock.com 04-13-2010 10:08 PM

Quote:

Originally Posted by donlite (Post 510339)
Looks good. Hopefully the needles where for the glue:lol:

lol
some for the glue,(some to keep me awake. not.:biggrin:)

i thought someone would get a kick out of that photo

RIPTANK 05-21-2010 02:41 AM

elias, that thing looks wicked! Do you have the blue prints for it? I wanna try making one!

Cheers!

eli@fijireefrock.com 05-21-2010 05:39 AM

Quote:

Originally Posted by RIPTANK (Post 520595)
elias, that thing looks wicked! Do you have the blue prints for it? I wanna try making one!

Cheers!



i will try to put something to read and some end results photos tomorrow.
if you like you could come and see it personally.

cheers :biggrin:


All times are GMT. The time now is 09:17 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.