|
http://www.unitedconstruction.ca/gizmo/P1020240.JPG
Ok, now i remember web code :) This is Kai. http://www.unitedconstruction.ca/giz...%20(Small).JPG and Kristi http://www.unitedconstruction.ca/giz...%20(Small).JPG The Control Board http://www.unitedconstruction.ca/giz...%20(Small).JPG Dart Pumps http://www.unitedconstruction.ca/giz...%20(Small).JPG Sump http://www.unitedconstruction.ca/giz...%20(Small).JPG Plugs for the monitor hardware. http://www.unitedconstruction.ca/giz...%20(Small).JPG The 1 GFI handles all the plugs. I hate using GFI plugs on "mission critical" hardware, nothing worse that being on holidays and for whatever reason, the GFI trips and shuts down the heaters or pumps. http://www.unitedconstruction.ca/giz...%20(Small).JPG This is 2 of the feeder junction boxes on the ceiling above the sump. The wires hang down with a cord cap on the end to plug the devices in. Keeping the plugs suspended eliminates any worry of water getting in, or at least sitting in the plug. http://www.unitedconstruction.ca/giz...%20(Small).JPG Left: Main tank ballasts for the 3x400w MH. Right: more junction boxes http://www.unitedconstruction.ca/giz...%20(Small).JPG Here's the front of the sump. The line at the bottom is for draining the sump for water changes or service. It is connected to a drain system that goes around the whole mech room, i'll show some pics soon. The toilet tank is my DIY wavemaker. http://www.unitedconstruction.ca/giz...%20(Small).JPG Ozone dumahiky, and nitrate, ph, calcium and salinity monitors http://www.unitedconstruction.ca/giz...%20(Small).JPG Here is my old display tank. Its now a fuge. 70g worth of fuge. http://www.unitedconstruction.ca/giz...%20(Small).JPG Here's the backside of the display tank. The light is on a suspension rig, so I can raise it up for feeding, servicing, etc. in its lower position it sits just mm above the rim http://www.unitedconstruction.ca/giz...%20(Small).JPG Left is the Venmar 3100. It sucks in air directly from this room to dehumidify, clean and expel bad air. Nice piece of kit. On the Left is the breeder rack. it has 2x 250mh lights and is/will be plumbed into the sump. |
http://www.unitedconstruction.ca/giz...%20(Small).JPG
This is the mechancial wall for the house and tanks. In the bottom left is the RO/DI units. 400gpd. http://www.unitedconstruction.ca/giz...%20(Small).JPG This is a lopsided view of the overflow in the display. I use all spaflex pipe to reduce strain on the bulkheads. http://www.unitedconstruction.ca/giz...%20(Small).JPG Pic of the lighting rig in the upper position. http://www.unitedconstruction.ca/giz...%20(Small).JPG Pic under the display tank. The bottom left 2" is a sump overflow drain. It goes right into the floor drain. The Mrs put one condition on this project. NO MORE FLOODS. :| http://www.unitedconstruction.ca/giz...%20(Small).JPG This is the clam tank space. http://www.unitedconstruction.ca/giz...%20(Small).JPG Frag tank space on the left, clam on the right http://www.unitedconstruction.ca/giz...%20(Small).JPG Facing back towards the control board. The temp house audio rack is in the background. http://www.unitedconstruction.ca/giz...%20(Small).JPG This is the electrical board. Its a work in progress. We are adding 2 wind turbines this spring (to cover the large power bill i'll be generating) Thats what the shut-offs and meter sockets are for. The top centre is the house network. http://www.unitedconstruction.ca/giz...%20(Small).JPG Here is a bit clearer pic of the venmar http://www.unitedconstruction.ca/giz...%20(Small).JPG Parts n tools http://www.unitedconstruction.ca/giz...%20(Small).JPG This is a view from the home theatre room towards the tank. http://www.unitedconstruction.ca/giz...%20(Small).JPG http://www.unitedconstruction.ca/giz...%20(Small).JPG http://www.unitedconstruction.ca/giz...%20(Small).JPG That wall is where the projection screen will be. http://www.unitedconstruction.ca/giz...%20(Small).JPG |
Holy smokes,
Will you have any money left for having kid's? Great pictures though. Hit the fast forward button and didn't find any of the tank up, fully loaded and running. So I will keep pushin it. Ha, anyhow looks like quite the set up, I am jealous. |
Is that a Shiba Inu? We have a black and tan one in our house, pretty cool dogs.
|
Looks great, But why didn't you just get a couple 4 gang electrical boxes to put your switches in instead of nippling to single boxes???
http://tbn1.google.com/images?q=tbn:...500_AA280_.gif |
Quote:
|
Wow!! can't wait to see it running. Spectacular work!!
|
This one looks like it will be top notch*impatiently waits*
|
Wow, it's almost overwhelming!
One thing, those nitrate probes aren't intended for continuous monitoring. Having said that, maybe keeping the probe wet will help it last longer. Who knows.. That's awesome you're adding wind turbines ... that's something I was wanting to look into one day. I'll be watching this one and learning !! |
| All times are GMT. The time now is 11:09 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.