Canreef Aquatics Bulletin Board - Vertex rodi issue.

Page 2 of 2

Show 40 post(s) from this thread on one page

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)

- - Vertex rodi issue. (http://www.canreef.com/vbulletin/showthread.php?t=113619)

Proteus

04-19-2015 05:03 PM

I'll call proline and see

reefwars

04-19-2015 05:31 PM

Quote:

Originally Posted by Proteus (Post 946429)

I'll call proline and see

If not ask them for a used booster pump to buy they always have them in stock :)

hillegom

04-19-2015 05:41 PM

Before you order new, check your connections.
Is the booster pump getting power?
Is the pressure sender sending the proper signal? If not, the pump will think that the psi is already high.
As mentioned take the pump off line and see if it will run, if it is getting power?
12V pump? maybe the transformer if pump does not start.
A lot of things to check before you have to spend big bucks

Proteus

04-19-2015 05:48 PM

I can feel the pump vibrate,

The Codfather

04-19-2015 06:02 PM

Pump

Nick, I think I've a pump(used, but works) downstairs if you need one ASAP, feel free to use it until you get a replacement.
I've actually got a whole setup, so anything you might need, I should have.

Proteus

04-19-2015 06:03 PM

Quote:

Originally Posted by The Codfather (Post 946436)

Nick, I think I've a pump(used, but works) downstairs if you need one ASAP, feel free to use it until you get a replacement.

Thanks Bob I'll keep u in mind.. Phil is going to bring get me his unit so I can get tank filled. I have MSG proline also

All times are GMT. The time now is 05:22 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page