PDA

View Full Version : Reeflo Hammerhead/Barracuda question


Alberta-newb
07-08-2013, 12:00 AM
Wondering if anyone has one of these handy for a measurement. After several hours googling I've had no luck. What I need is the distance from the center of the inlet down to the base (floor). I can't seem to find a diagram.

I would like to drill my sump for a bulkhead and tie a spare Dart in to circulate my fuges, sump and QT tanks. Once the big tank is ready upstairs I'll be replacing the Dart with a Hammerhead. Hate to drill the bulkhead to low to fit.

Thanks,

Francis

Evilweevil
07-08-2013, 01:45 AM
I just measured mine from the base where it sits to the center of the inflow it is 3 3/8" hope that helps you ..... I am mounting mine with spa flex to give a little flexibility and vibration dampening

daplatapus
07-08-2013, 02:27 AM
My hammerhead/barracuda measures 3 1/2" to center and my dart measures 3 1/8" to centre

Alberta-newb
07-08-2013, 03:04 AM
Perfect, thank you both! Now to start drilling glass :biggrin:

Francis