3" bulkhead fittings, anyone know where to get one??

[zum14]

So I wont go too far into the details but little sleep led to some assuming going on and some skipping of verifying steps happend and now I have a 3 1/2" hole in the side of my sump. Crap. 2" bulkhead takes a 3" hole. So im after a 3" bulkhead and I will just bush it down. Im hoping I can find one as if I dont its $200 for a new sump tub. Anyone know where to find one??? I have a couple emails out to some of the canreef vendors but nothing as of yet. Thanks.

[liz]

http://www.winnipegplastics.com/bulkhead-fittings
Not sure if they sell to the public but you could contact them?

[hillegom]

If they don't have one, try here, online in usa

http://flexpvc.com/cart/agora.cgi?product=BulkheadFittingsStandard

[H2o2]

I think you may get away with a 2 " cause it says up to 3 1/2 " hole

[zum14]

I think you may get away with a 2 " cause it says up to 3 1/2 " hole

on whos bulkhead? The ones from JL say 3" hole. I might be forced to order from one of the usa sites but im trying to find something a little closer then 2 weeks away. Thanks.

[spit.fire]

Southern drip irrigation in Chilliwack

[Mike-fish]

I think scd 80 2" uses a 31/2" mount hole

[cuz]

check with concept in calgary

[drabber]

I think scd 80 2" uses a 31/2" mount hole

slightly smaller than 3 1/2 but should do the trick!

[Evilweevil]

If its just the sump can't you silicone on apiece of plexiglass over the hole let it dry then redrill it ?

[hillegom]

I can't remember if you have a glass or plexiglass sump, but, you don't want to silicone plexi to glass. Won't hold. Either glass to glass or acrylic to acrylic with weld-on glue.

[zum14]

Ya its a tuff tubs oval trough. Thanks though. I have a couple of people checking into some bulkheads. Going to wait and see if anything comes up. Heres hoping.

[daplatapus]

I got mine from a place here called Iritex. They have a web site, but they're only on the island if you can't find anything else.

[Bblinks]

Corix will have what you need and the sch 80 2 " bulkhead will work with that hole size.

[spit.fire]

If corix has any I can ship one out to you, shipping was cheaper than I thought on that skimmer so I can cover shipping

[zum14]

Hello. Thank you to everyone for the help. Someone locally dug out a used sump trough out for me. A little clean and I will be able to drill new holes. The right size this time. It's only a 110gal but that's ok. The price was right. Thanks again for all the help.