VHO and Work Horse ballast.

[robert]

Hi - anybody could help with proper wiring diagram to power one 110W VHO with Workhorse 7 ballast for optimal run?

Thanks.

[StirCrazy]

3 red wires to one end of the bulb, the yellow to the other end.

kinda like this pic but only use 3 wires (cap off the 4th) and pretend it is one bulb that is curved for some reason, so ignore the blue wires :rolleyes:

http://members.shaw.ca/stircrazy/vhoseries.jpg

Steve

[robert]

3 red wires to one end of the bulb, the yellow to the other end.

kinda like this pic but only use 3 wires (cap off the 4th) and pretend it is one bulb that is curved for some reason, so ignore the blue wires :rolleyes:

Steve

Steve, could you please explain why only 3 not 4 :confused:

[StirCrazy]

one wire is NO current level, two for HO, and 3 for VHO. 4 will overdrive the VHO some.

Steve

[robert]

one wire is NO current level, two for HO, and 3 for VHO. 4 will overdrive the VHO some.

Steve

Steve - thank you very much for you vey fast response and help. :biggrin: :biggrin: :biggrin: