PDA

View Full Version : FS: Rimless Starphire Tank - Calgary


sphelps
10-03-2012, 01:50 PM
Looking for $400

54" x 22" x 20" (L x W x H)
12mm starphire 3 sides
Fully Polished

There is a scuff on the glass, left pain in the back bottom corner. Other than that no scratches that I found during inspection. Tank is clean with exception of coraline on the overflow that I can remove on request.

http://i11.photobucket.com/albums/a174/sphelps/100G%20Tank%20Build%202011/9FEE9911-8649-4168-860D-1F3D6488383A-2048-000004C80B01B677.jpg

Tank has center overflow with 2 drains that can hold up to 1.25" bulkheads. Tank is also drilled in base rear corners for return lines, you have to extend a pipe from the base to the water surface for the return lines. It was done this way so the tank can be installed flush against a wall. I will include black pre-made pipes at the perfect height.

wmcinnes
10-05-2012, 08:09 AM
pmd

JDigital
10-05-2012, 02:31 PM
1 of those foam pieces wouldn't happen to be 40" long would they?

sphelps
10-05-2012, 02:57 PM
1 of those foam pieces wouldn't happen to be 40" long would they?

Nope

nanoreefnewbie
10-06-2012, 07:47 PM
1 of those foam pieces wouldn't happen to be 40" long would they?

Looks like 6ft piece of foam too me:biggrin: