FS: Cube Tank Set-Up Edmonton

[pat18]

40g Starphire cube 24" x 24" x 18" with sump 21" x 21" x 16". On a 36" tall metal stand. The aquarium is 1/2" starphire. Water Blaster 2000 water pump (Used for about 3 months, ASM G1X Skimmer, 250w Fishneedit Metal Halide w/ Aquamaxx 14k bulb, Vortech MP10 W ES, Red Sea Test Kits, fish food, refractometer, powerhead for mixing fresh saltwater, BRS 75 GPD RO/DI Plus unit (only about 150 gallons of water went through it), enough salt to make over 100 gallons of saltwater, Aqueon Pro 150w heater, and a few small items. It is running, had about 30 pounds of dry rock, currently has two clown fish, a purple and green hammer, some zoas and a green and brown frogspawn. The hammer has two heads which are splitting in half, and the frogspawn has three heads with two more coming out the side. I was away and a friend accidentally over-fed the tank and it currently has a diatom outbreak that is slowly clearing. Planing to move, so need to sell this ASAP, don't have a camera so I can not post photos. Put in a LOT more than this but asking $1600 O.B.O. as I need it gone ASAP.

[pat18]

Bump

[pat18]

Price is flexible

[Rusty dog]

Are you willing to part out

[pat18]

The system is running so I would have to sell the live stock first, but for now I think it would be better to try to sell as a whole

[Rusty dog]

I'd want ur zoas, frogspawn, and hammer

[pat18]

If there is a person enough people interested to get all of the parts gone then I guess I could part it out

[darrin41]

what is the lowest you would go as i would take everything , i need a new setup , mine was killed

[pat18]

PM Sent

[pat18]

If there is a person enough people interested to get all of the parts gone then I guess I could part it out

Was going to say: If there is not a person interested in getting everything then I guess I could part it out.

[pat18]

Bump

[pat18]

$1500 O.B.O.

[pat18]

Had a no-show and borrowing a friends camera so I might be able to get a picture up if I find out how to post them.

[pat18]

If nobody wants the whole set-up then I will be parting it out starting tomorrow.
9908

[pat18]

Now Parting out if anyone wants anything please pm me. For now I am waiting for a reply on the corals and everything else is for sale.

[pat18]

I have a person waiting on the MP10 and the other powerhead, everything else still for sale

[pat18]

Livestock is gone, everything else still for sale

[Blink]

How much are you looking to get for the ro/di?

[pat18]

Pm'd

[pat18]

Bump Everything still for sale

[pat18]

Except livestock

[pat18]

Haven't updated in a while, but finally got a camera. Not the best pics. All is still for sale, except for MP10 which is pending, and the PH test kit which expired. PM with offers on everything else. Also have a half full pack of mysis shrimp and a pack of Cyclop-eeze with just one missing.
10010
10011
10012

[Blink]

Prices may help drive interest.

[pat18]

Asking:
Aquarium, Sump, Stand- $550
ASM G1-X Skimmer- $75
Water Blaster 2000- $75
Fishneedit 250 w Metal Halide w/ ballast- $80
Enough salt to make over 100 gallons of salt water- $20
RO/DI Unit, only put about 150-175 gallons through it- $240
Heater is like new, have the box- $35
Refractometer and almost full bottle of calibration fluid- $20
The two test kits, $20 each or $30 for both
The Selcon is 3/4 full- $10
Coral Rx is almost full-$15
Essential Elements is over half full, the two calcium additives are almost full, $15 for all three things.
That should be everything, please PM offers or questions.

[pat18]

MP10 is SOLD

[pat18]

Bump, I need this gone

[Aysha]

Your prices are very high compared to going selling rate,

I bought my starphire cube used as a package for 400.00

Included canopy,250 watt metal halide setup,finished oak stand,30 gallon sump,pumps,plumbing and a lightly used 60 gallon starphire cube.

I'm not saying your prices may be too high it's just very hard to sell tanks for very much money right now.

[pat18]

Aquarium, stand, sump-$500 will add the light if someone takes the tank.

[pat18]

Open to offers

[Nuccio46]

Would u be interested in selling your mp 10?

[pat18]

MP10 is SOLD
Sorry sold

[pat18]

Salt, Refractometer and calibration fluid, and test kits SOLD

[nanoreefnewbie]

Wat is left??

[pat18]

Aquarium, Sump, Stand- $550
ASM G1-X Skimmer- $75
Water Blaster 2000- $75
Fishneedit 250 w Metal Halide w/ ballast- $75
RO/DI Unit, only put about 150-175 gallons through it- $220
Heater is like new, have the box- $35
Selcon is 3/4 full- $10
Coral Rx is almost full-$15
Koralia Nano 240 GPH $20
Essential Elements is over half full, the two calcium additives are almost full, $15 for all three things.
Also have a barely used Aquac Remora Skimmer with MJ 1200 used it for a month before I upgraded. Asking $180 O.B.O.
BFS Carbon/GFO Reactor w/ almost a pound of GFO $35
Koralia nano 425 GPH in box $25
Might Have some other things so I will look around see if I find anything else.

[pat18]

Pictures of light, ballast and everything else I have left on my table. Also found a Biocube skimmer-$20 O.B.O. Will post pic of the AquaC Remora once I have a chance. Any questions please send a PM.
10057
10053
10054
10055
10056

[pat18]

Koralia Nano's pending sale

[pat18]

Koralia Nano's SOLD

[pat18]

Light, NanoCube skimmer, scraper, fluval heater Pending

[pat18]

Reactor and Hydor Theo heater SOLD

[pat18]

Aquarium, Sump, Stand- $550
ASM G1-X Skimmer- $75
Water Blaster 2000- $75
Fishneedit 250 w Metal Halide w/ ballast- $75
RO/DI Unit, only put about 150-175 gallons through it- $220
Aqueon 150 Heater is like new, have the box- $35
Selcon is 3/4 full- $10
Coral Rx is almost full-$15
Essential Elements is over half full, the two calcium additives are almost full, $15 for all three things.- Pending
Also have a barely used Aquac Remora Skimmer with MJ 1200 used it for a month before I upgraded. Asking $180 O.B.O.

[pat18]

Bump

[pat18]

Also have 1 liter of sealed Bio-pellets, paid $50 asking $40

[pat18]

Updated:
Aquarium, Sump, Stand- $500
ASM G1-X Skimmer- $75
Water Blaster 2000- $75
Fishneedit 250 w Metal Halide w/ ballast- $70
RO/DI Unit, only put about 150-175 gallons through it- $220
Aqueon 150 Heater is like new, have the box- $35
Selcon is 3/4 full- $10
Coral Rx is almost full-$10
1L Bio-pellets $40

[pat18]

Also still have the Biocube skimmer for $20

[pat18]

prices are flexible

[pat18]

Bump

[pat18]

Aquarium, Sump, Stand- $500
ASM G1-X Skimmer- $70
Water Blaster 2000- $70
Fishneedit 250 w Metal Halide w/ ballast- $65
RO/DI Unit, only put about 150-175 gallons through it- $220
Aqueon 150 Heater is like new, have the box- $35
Selcon is 3/4 full- $10
Coral Rx is almost full-$10
1L Bio-pellets $40
BioCube Skimmer- $20

[Jaws3]

PM'd You

[pat18]

Bump

[pat18]

Nobody wants such a nice tank?

[MarkoD]

I'm sure people want it. Just no one want to pay 500 for it

[FishyFishy!]

Nobody wants such a nice tank?


Not for that price... no.

My opinion is... if it dosn't sell after a month... There's something wrong with your price....and this has been for sale for 2 months... so maybe put two and two together.

My 2 cents - The whole thing with accessories isn't worth anything over $500.

[pat18]

Willing to go lower on most of the prices.

[pat18]

Aquarium, Sump, Stand
ASM G1-X Skimmer
Water Blaster 2000
Fishneedit 250 w Metal Halide w/ ballast
Aqueon 150 Heater is like new, have the box
Selcon is 3/4 full
Coral Rx is almost full
1L Bio-pellets

Need this gone, so all of the above $500
BioCube Skimmer- $15
RO/DI Unit, only put about 150-175 gallons through it- $200

[pat18]

RO/DI Unit- Pending

[Adread]

I'll take the biocube skimmer off of your hands.

780-919-9404

Thanks
Adam

[pat18]

BioCube Skimmer and RO/DI Unit SOLD

[Proteus]

I'd give u $200 for tank stand and sump. That's about all. There to many tanks coming up for sale to ask for a price like that. My brother sold his 240g cube for $700......

[pat18]

Not sure if I mentioned it but both tanks have polished edges and no scratches.

[mexxedm]

I did a quote for 75G cube tank from AI. It only cost me $135. I think you are asking too high for the price for a 40G tank.

[riceboy]

hmm didn't realize starphire and polished edges was that cheap these days

[cale262]

I did a quote for 75G cube tank from AI. It only cost me $135. I think you are asking too high for the price for a 40G tank.

The quote cost you $135?

[noirsphynx]

I did a quote for 75G cube tank from AI. It only cost me $135. I think you are asking too high for the price for a 40G tank.

I HIGHLY doubt it cost that little for trimless/braceless, polished edges and all starphire! In my opinion I think this tank is worth what's being asked and I say this knowing full well what it cost and it's only 3 years old. There may be others cheaper but a custom built starphire tank, custom built sump and custom built metal stand are not cheap. Also the water blaster pump which is about $190 retail isn't more than 6 months old.

[pat18]

That must have been a basic tank, because when I was getting the tank I have now, I went around asking for quotes and the one I got from AI with regular glass, no polished edges, thinner glass, etc was $295. So add on 1/2 inch starphire glass, a steel stand and a sump and it ended up being much more. The display tank itself was just under $500 when I got it quoted from most places.
I can't go any lower on the price, if it doesn't sell, then I will put it away for now and maybe someday I will use it.

[AGY]

I HIGHLY doubt it cost that little for trimless/braceless, polished edges and all starphire! In my opinion I think this tank is worth what's being asked and I say this knowing full well what it cost and it's only 3 years old. There may be others cheaper but a custom built starphire tank, custom built sump and custom built metal stand are not cheap. Also the water blaster pump which is about $190 retail isn't more than 6 months old.

Agreed Noirs!!! Leave the kid alone! If you are not interested in the tank then please keep your mouth shut! I got his RO unit and Skimer yesterday. the last thing he wants is rip-off anybody he gave me more than he had posted on the RO . He is a young kid that maybe saved money for long time for his tank and now is trying to get the most he can recup.

[Salt2Death]

I HIGHLY doubt it cost that little for trimless/braceless, polished edges and all starphire! In my opinion I think this tank is worth what's being asked and I say this knowing full well what it cost and it's only 3 years old. There may be others cheaper but a custom built starphire tank, custom built sump and custom built metal stand are not cheap. Also the water blaster pump which is about $190 retail isn't more than 6 months old.

........ Must Be D#%* Head Week. Every @Ss Clown Has A Stupid Comment To Make.
(If you don't like the kids price SH T UP about it, move on and read a different post. Pathetic to sit and shoot off at a post in a forum like a school yard bully. Honestly grow up and move on!)




Sent Via The Pirate Ship...

[noirsphynx]

........ Must Be D#%* Head Week. Every @Ss Clown Has A Stupid Comment To Make.
(If you don't like the kids price SH T UP about it, move on and read a different post. Pathetic to sit and shoot off at a post in a forum like a school yard bully. Honestly grow up and move on!)




Sent Via The Pirate Ship...

This is directed at me?? I was defending Pat's price and Pat knows why.

[Salt2Death]

This is directed at me?? I was defending Pat's price and Pat knows why.

Was agreeing with u as well:

Just sick of the sad bullies that make using this forum less that desirable.


Sent Via The Pirate Ship...

[MarkoD]

Lol you guys are hilarious. A tank is only worth what someone is willing to pay for it. He can ask whatever he wants.

It's the "ASAP" part that throws everyone off

[Doug]

Was agreeing with u as well:

Just sick of the sad bullies that make using this forum less that desirable.


Sent Via The Pirate Ship...


Please dont group us because of a few. Its a great forum.

And to the others, please refrain from posting in a buy/sell unless you doing such. IT IS A PART OF THE BUY/SELL RULES. :mrgreen:

Thank you

[JmeJReefer]

Sold me his reactor and much needed heater! He took care of his equipment. Great deals IMO. Thanks Pat!You definitely can't use just any old silicone, that will definitely cause problems!
I use SCS1200 made by GE. You can find it at contractors store, not Home Depot.

[pat18]

Thanks everyone for the supportive comments. Also, it is no longer ASAP as I got most of the stuff gone, but would still like to sell this tank as it is taking up a lot of space and I can't set one up anytime soon either.

Water Blaster pump is SOLD

[pat18]

Everything is SOLD

[fixerupper]

It was great to meet you and your family. Everything looks great. Cheers.