PDA

View Full Version : Need LED driver replacement help


Dlo132
07-09-2012, 11:28 PM
Hey all- I'm not electrician, but one of the drivers for my LED lights went out recently, and I can't find a replacement. I know its the driver because I swapped them and the alternate cord works on both sets of lights.

The specs are as follows...

Constant current LED driver-
model 1361 spec 16@3w
ac220v-50/60hz
output d36-60v 650ma +/-3%
ta=40deg tc=80deg

Thanks in advance!

justincgdick
07-10-2012, 12:49 AM
What is the brand? Fixture or driver.

I think this might do ya. http://www.ledgroupbuy.com/inventronics-40w-driver-700ma/

Dlo132
07-10-2012, 03:22 AM
I'm not sure- they are non-dimmable, and has two rows of lights- one on each driver- also no light switch... I'm assuming I'll have to re-wire in the old plug that goes from the fixture to the driver, as it's a strange plug that goes into the lights themselves...

I'll have to try that ballast - fingers crossed.