Rusty dog
06-25-2012, 03:37 PM
I bought a 240gal cube tank off kijiji about a month ago.
http://i1270.photobucket.com/albums/jj608/rustydog83/668eaf52.jpg
The overflow box was built and installed by the Codfather
http://i1270.photobucket.com/albums/jj608/rustydog83/e8b70c26.jpg
About a week after buying the tank I started an building a custom stand out of 4x4, 2x4, and good one side 1/2" plywood.
http://i1270.photobucket.com/albums/jj608/rustydog83/fccef3ad.jpghttp://i1270.photobucket.com/albums/jj608/rustydog83/991e8e9f.jpghttp://i1270.photobucket.com/albums/jj608/rustydog83/50c1334e.jpghttp://i1270.photobucket.com/albums/jj608/rustydog83/b597ead8.jpg
I drilled 5 holes in the stand. 3 are for drain lines, 1 for return line, and one for electrical. http://i1270.photobucket.com/albums/jj608/rustydog83/ad8c01c3.jpg
The stand is almost complete at this point. Just missing cabinet doors and stain.
http://i1270.photobucket.com/albums/jj608/rustydog83/2c16d6b8.jpg
I also built a canopy that still needs the access doors cut in.
http://i1270.photobucket.com/albums/jj608/rustydog83/f0ed55a6.jpg
Here's how my returns are gonna run
http://i1270.photobucket.com/albums/jj608/rustydog83/d178fbc1.jpg
Ill be running a bubble magnus nac 66 for my skimmer in a custom sump
http://i1270.photobucket.com/albums/jj608/rustydog83/f3d273a8.jpg
As for lights I have 4 radions that are going over top this huge tank. I am considering running a sicce 3200gph return pump. I am also putting in 2 mp40s in this tank.
There is a dry section in the stand for all my electrical.
I will post more when I get more accomplished on this build. I still need to drill the tank and do the plumbing.
http://i1270.photobucket.com/albums/jj608/rustydog83/668eaf52.jpg
The overflow box was built and installed by the Codfather
http://i1270.photobucket.com/albums/jj608/rustydog83/e8b70c26.jpg
About a week after buying the tank I started an building a custom stand out of 4x4, 2x4, and good one side 1/2" plywood.
http://i1270.photobucket.com/albums/jj608/rustydog83/fccef3ad.jpghttp://i1270.photobucket.com/albums/jj608/rustydog83/991e8e9f.jpghttp://i1270.photobucket.com/albums/jj608/rustydog83/50c1334e.jpghttp://i1270.photobucket.com/albums/jj608/rustydog83/b597ead8.jpg
I drilled 5 holes in the stand. 3 are for drain lines, 1 for return line, and one for electrical. http://i1270.photobucket.com/albums/jj608/rustydog83/ad8c01c3.jpg
The stand is almost complete at this point. Just missing cabinet doors and stain.
http://i1270.photobucket.com/albums/jj608/rustydog83/2c16d6b8.jpg
I also built a canopy that still needs the access doors cut in.
http://i1270.photobucket.com/albums/jj608/rustydog83/f0ed55a6.jpg
Here's how my returns are gonna run
http://i1270.photobucket.com/albums/jj608/rustydog83/d178fbc1.jpg
Ill be running a bubble magnus nac 66 for my skimmer in a custom sump
http://i1270.photobucket.com/albums/jj608/rustydog83/f3d273a8.jpg
As for lights I have 4 radions that are going over top this huge tank. I am considering running a sicce 3200gph return pump. I am also putting in 2 mp40s in this tank.
There is a dry section in the stand for all my electrical.
I will post more when I get more accomplished on this build. I still need to drill the tank and do the plumbing.