View Full Version : Flat Worm Exit dose size help
bluesox68
06-08-2012, 04:52 AM
I plan to dose tomorrow and I have my water and carbon ready, I have a 40 gallon display and a 20 gallon sump/fuge with about 75 lbs of lr so my guess would be about 40 gallons of water valume? My question is if I have that right how many drops do I use? I can't find the instructions! Help and advice and tips are welcome:biggrin: wish me luck I'm very nervous
syncro
06-08-2012, 05:05 AM
Search google for "flatworm exit instructions".
http://www.drsfostersmith.com/product/prod_display.cfm?pcatid=16551
http://www.marinedepot.com/Salifert_Flatworm_Exit_Flatworm_Pest_Control-Salifert-SF5111-FIADAFFE-vi.html
Not all flatworms can be controlled with flatworm exit (FE). I think only red planaria. I suggest testing first by pulling a dozen flatworms into a container with tank water and adding the recommended concentration of FE. If most are still alive after an hour then you either need a higher dosage or you have a species not susceptible to FE. I found FE didn't kill my flatworms and months later I still worry there is FE slowly leaching back out of the sand and rock. If you do have red planaria, follow the FE instructions carefully - in particular remove as many as you can before treating.
More info on flatworms and FE:
http://theaquariumwiki.com/Flatworm
Good luck. Let us know how it goes!
Bblinks
06-08-2012, 05:11 PM
I had some in the biocube, did exactly what was on the instruction for flat worm exit and it worked awesome, no more flat worms(brownish red) and it has been a couple of month. I also dosed with 2 clams and some inverts in it. Clams are okay but the smaller sexy shrimps are dead.
vBulletin® v3.7.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.