View Full Version : Radion profile sharing

03-18-2012, 05:26 AM
Is it possible to share custom profiles?
If so I thought I would start a thread that you could upload your custom profiles for others to use and tweak.

03-18-2012, 08:37 PM
how do we do this? i would like to see other profiles also.

03-19-2012, 01:23 AM
I'll play with it more and post some instructions when I figure it out.

03-20-2012, 03:29 AM
sounds good subman, i messed with it abit and cant figure where to copy it to so i can share it.
also how high is everyone running thier radions over the water?

03-20-2012, 03:46 AM
mine are 8" above the water... even at 20% intensity I have been getting some bleaching..

03-20-2012, 04:07 AM
Mine are 11" above the water, set at 60% intensity, but colors at set at factory, except moonlight. Would love to see what others are running as well. New birds nest frags got moved down to frag rack on sand due to bleaching and is doing well now, everything else had no issues.

03-20-2012, 04:20 AM
Mine are about 10" off the water. I switched from MH to led at Christmas. I started at 30% and gradually ramped them up to 100%. I start my day at 20% 14k and over an hour they go up to 100% 14k then after 3 hours I have them go to 12K for a couple of hours, then back up to 14K for 2 hours then fade off. I've only had one Favia bleach so far. this is with the artificial program.

03-20-2012, 04:37 AM
so I downloaded a great profile made by Jon from ecotech service. I tried to upload it to canreef but no go (invalid file) so I set up a 4share account and uploaded it there and here is the link:

JonsRadionGraph.etg (http://www.4shared.com/file/vq0BgTM-/JonsRadionGraph.html)

you should be able to download it and importing it via the ecotech software.
you may have to set the sunrise/set to 10am and 11pm

let me know if it works.

Reef Pilot
03-20-2012, 01:50 PM
I have 3 radions 8" above the water. I just run the Natural mode with extra points added for night time moonlight. I was running 40%, but had to cut back to 30%, for my softies and LPS. I will be moving to SPS later and then should be able to ramp up the intensity.

03-22-2012, 12:56 AM
So I took the other profile and modified it a bit more red in the morning for sunrise and brighter at peak hours.
check it out and see what you think.

subman(1).etg (http://www.4shared.com/file/ZzLxK0n2/file.html)

would love to see some others too.

if you can't post them up pm me and I'll post them up for you.

03-24-2012, 01:55 AM
another one great for a starting point and algae control
Anti-algae.etp (http://www.4shared.com/file/xa9Rs-zr/file.html)

This file is an .etp file so it needs to be opened via "open project" under file in the radion software

04-06-2012, 11:43 AM
hey subman you have any other profiles to share

04-16-2012, 02:13 AM
Hi Subman, I tried downloading one of your profiles but the 4share program is kind of a pita. Is there another way to share profiles?

04-16-2012, 02:34 AM
Ill try using my dropbox. Canreef won't let me upload to it. I could email it to you if you want, pm me if you want that.

04-16-2012, 02:43 AM
Just played around a bit more and got it loaded up, thanks! I've been playing with the lights all weekend, will give the fish a bit of a break now and see how this looks in a couple of days.

04-16-2012, 03:25 AM
I have set up a profile sharing folder on my dropbox so we can download and upload profiles easily. If you want an invite pm me your email addy and Ill add you.

04-16-2012, 04:14 AM
Ive sent out invite to everyone who asked. Ive never done this before so please let me know how it works, and even if it works :neutral:

If someone knows a better way to do this please post it up! I have no idea what I'm doing lol

04-16-2012, 02:41 PM
Ive sent out invite to everyone who asked. Ive never done this before so please let me know how it works, and even if it works :neutral:

If someone knows a better way to do this please post it up! I have no idea what I'm doing lol

I've downloaded a couple profiles with ease so far! Perhaps a compendium of the programs with details can be posted somewhere?

That way my lazy self doesn't have to download each program, open it, and see whether or not it will be useful to my scenario or not.

Other than that, whats a good program / intensity to start?

04-16-2012, 03:01 PM
I think a good starting point is the anti-algae profile.