PDA

View Full Version : LF: Brute gargage can dolly with castors.


smokinreefer
01-10-2012, 05:13 PM
let me know if you have one, or if you know where to get them.
thanks!
http://www.homedepot.com/catalog/productImages/400/9b/9b4162ee-e69e-49e5-b6e7-98338aa5ff65_400.jpg

Chowder
01-10-2012, 05:17 PM
Believe Home Hardware Sells them.

Delphinus
01-10-2012, 05:35 PM
Home Depot should have them too.

Chowder
01-10-2012, 05:38 PM
Home Depot should have them too.

Actually that is what I ment to say.

Chris

christyf5
01-10-2012, 05:50 PM
Got mine from Home Depot, they were $50. Worth every penny :biggrin:

smokinreefer
01-10-2012, 06:10 PM
hrmmm...
they dont seem to be listed on the homedepot.ca website...
and i didnt see them at my local HD.
i guess not all stores carry them.
i will keep looking then!
thanks!

ScubaSteve
01-10-2012, 06:19 PM
I saw them at the Home Depot on terminal about 2 months ago.

gregzz4
01-10-2012, 06:21 PM
Don't know what size you need, but would one of these work?
Princess Auto Barrel Dolly. Argh, I can't get a link to work from their search site. Go to Princess Auto (http://www.princessauto.com/pal/) and search 'barrel dolly'. They have 3 available for less than the $50 quoted. What's strange is the larger one is cheaper. I have the 23" one and it works quite well. Just had to lube the wheels a bit.

Big Tang
01-10-2012, 06:27 PM
Canadian tire sells them. That's where I got mine six months ago

dc4
01-10-2012, 08:51 PM
hrmmm...
they dont seem to be listed on the homedepot.ca website...
and i didnt see them at my local HD.
i guess not all stores carry them.
i will keep looking then!
thanks!

The one in burnaby, behind lougheed hwy had them a few months ago, when I was last there.

pshea
01-10-2012, 09:01 PM
Walmart has them here...but I am on the other side of the world!

reefgirl189
01-10-2012, 09:13 PM
Any Acklands Grainger will be able to order it in for you.

smokinreefer
01-11-2012, 05:57 AM
wow! so they're basically everywhere except for the places i've been to!
thanks for all the suggestions!

Mech Eng
01-11-2012, 02:48 PM
I have one you can have for $20.00

mike31154
01-11-2012, 03:51 PM
Not too hard to DIY something like this. Heavy duty castors, a sheet of plywood, a few nuts & bolts. Maybe not as pretty as the bought ones, but it will do the same job. Most hardware outlets will carry a variety of castors.

StirCrazy
01-11-2012, 10:37 PM
Not too hard to DIY something like this. Heavy duty castors, a sheet of plywood, a few nuts & bolts. Maybe not as pretty as the bought ones, but it will do the same job. Most hardware outlets will carry a variety of castors.

good idea, will end up costing more in the long run as a small heavy duty caster is 10 buck, the size I would use is 20 bucks. (bigger wheels make it easier to push around on the carpet)

Steve

hillegom
01-11-2012, 11:30 PM
Princess auto, Kelowna has used casters

Brandon5555
01-12-2012, 01:16 AM
Cut a piece of 3/4"-1" plywood into a circle that match the diameter of the base on your brute, then raise the center with another piece and throw some wheels on it.