PDA

View Full Version : BUBBLE MAGUS BM180CS-P dimensions needed


smithpl
01-08-2012, 08:09 PM
Hi,

I'm looking for dimmensions of BM180CS-P.
I would like to compare it with BM NAC7.
I would like to modify my NAC-7 to work with better pump like PSK 2500 but I don't know that cylinder will be suitable for more air in reactor area...

Thanks for help

Cal_stir
01-08-2012, 08:52 PM
BRS site has the dimensions

smithpl
01-08-2012, 09:02 PM
HI!,

What is BRS?
I'm looking for specific dimensions like dimension of cup, cone, tubes, etc...

Cal_stir
01-08-2012, 09:22 PM
Bulk Reef Supply
I have a BM180-CS, what do you want to know?

smithpl
01-08-2012, 09:26 PM
if BM180cs is the same as BM180-cs-p ( with pump outside of body )
I need to know:
1. Width and height of cone ( diameter bottom and top of cone )
2. Dimension of internal cylinder in cup ( W X H X diameter )

I need to know that PSK2500 will be work with NAC7 body...

Cal_stir
01-08-2012, 09:34 PM
mine has the pump in the body

smithpl
01-08-2012, 09:38 PM
P version has outside, look :

http://www.bubble-magus.com/bubble/uploadfiles/BM180CS-P.jpg

This is what I want to do.
When the pump is outside you get more time for blending water with air in reaction area.

Cal_stir
01-08-2012, 09:52 PM
mine looks wider at the base, it's hard to tell with picture

Cal_stir
01-08-2012, 10:03 PM
according to BRS site the NA7 has a max cyl diameter of 9"
the 180-CS has a max cyl dia of 7"

bubblemagus site says the 180-cs-p has a max cyl dia of 7"