View Full Version : RKL programming help
bignose
08-25-2011, 03:19 AM
I'm trying to setup my reef keeper to run a fan when my temp rises too high. I can't get it to work can anyone help?
I programmed a channel like this:
Function: controller
Device: iTemp
Setpoint: 83.0
Hysteresis: 0.1
On when: above
Cugio
08-25-2011, 01:52 PM
mode = auto
function = fan
set point = 26.5 celsius or whatever temp you have
default = off
save
Then change the main display to show iTemp by pressing the back button.
Did you upgrade to the new firmware?
bignose
08-28-2011, 04:03 AM
I don't have function fan, how do I upgrade my firmware?
apexifd
08-28-2011, 05:25 AM
go to digital aquatics forum and d/l "Myreef". and hook it up to your PC.
jostafew
08-28-2011, 05:27 AM
You could set up the same way I did my chiller:
Function: Controller
Device: iTemp
Setpoint: 78.8 (or your desired temp)
Hysteresis: 0.2
On when: Above
Should kick on at 80 and off at 78.6.
And don't forget to set the mode to Auto as mentioned above. I'm still on the older F/W from a year or two back.
bignose
08-29-2011, 05:39 AM
How do I connect to a pc? Do I need the net module?
Smudge
08-29-2011, 12:54 PM
You need to use the SID module and the MYReef program.
babyreef
09-23-2011, 04:14 AM
BLANK
Cugio
09-23-2011, 04:23 PM
If you go under Menu --> System --> Units, you can change the temperature to Celsius.
babyreef
09-23-2011, 05:20 PM
BLANK
vBulletin® v3.7.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.