View Full Version : mag7 part
martym
01-23-2004, 01:35 AM
Looking for mag7 input housing. I tightened it alittle too much :redface:
anyone with a recked mag7 with good housing or know where to order one from?
BCOrchidGuy
01-23-2004, 02:45 AM
Oh man, I'll see if I can find you one... bummer.
Doug
CHEAPREEF
01-23-2004, 02:57 AM
You can get a cover and impeller if you need here. http://www.jlaquatics.com/cgi-bin/shopping/jalstore.cgi?user_action=list&category=Equipment%3BWater%20Pumps&start=28
Clinton
mnoll406
01-23-2004, 04:37 PM
Hey Marty,
Did the same thing as you. Got a new one from J&L for $10.
Mike
BCOrchidGuy
01-23-2004, 06:36 PM
Marty, Eric at King Ed says' he'll give me one when he gets them in, if you can wait, they should be in with in a couple days.
Doug
Tom R
01-26-2004, 05:25 AM
If you are going to use the pump in the sump, you can just put the pump and housing together with ZAP straps. That is what I did when I tightened the srews to tight and broke the housing. That was 2 years ago and it is still holding.
Tom R
vBulletin® v3.7.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.