PDA

View Full Version : Building a sump/dsb/refugium


lodidodi
11-09-2010, 03:34 PM
I'm looking to build a custom sump/dsb/refugium for my tank and I was wondering if anyone had any suggestions on materials and layout. The dimensions are 36 x 15 x 15. I'd rather convert an old tank but every 36" tank I find is 18" tall and I don't have enough room to pull out the skimmer for cleaning. Any ideas?

Rbacchiega
11-10-2010, 06:37 PM
There are 20 gallon longs, which are 36" long but only 12" high.....but if you're going to build your own, look at acrylic.

Also, is there a reason you need to pull the whole skimmer out to clean it?

phi delt reefer
11-10-2010, 07:11 PM
There are 20 gallon longs, which are 36" long but only 12" high.....but if you're going to build your own, look at acrylic.

Also, is there a reason you need to pull the whole skimmer out to clean it?

LIAR!!!!!!!!!!!!!!!! LOL, 23 Long is 36"x12"x12"... a 20 Long is 30"x12"x12" - both are about $35 to $45 dollars at any pet store. not worth building out of acrylic at price in my opinion

FishyFishy!
11-10-2010, 07:21 PM
LIAR!!!!!!!!!!!!!!!! LOL, 23 Long is 36"x12"x12"... a 20 Long is 30"x12"x12" - both are about $35 to $45 dollars at any pet store. not worth building out of acrylic at price in my opinion

+1 - unless you've done something with acrylic before... don't bother. You'll just waste $30 sheets of acrylic.

Just buy either a 20 gallon long or a 30 and silicone some acrylic partitions into it. way easier...

OR just buy one off here! They are all over the place, and most of them are awesome deals.

paddyob
11-10-2010, 07:28 PM
LIAR!!!!!!!!!!!!!!!! LOL, 23 Long is 36"x12"x12"... a 20 Long is 30"x12"x12" - both are about $35 to $45 dollars at any pet store. not worth building out of acrylic at price in my opinion


36x12x12 = 22 gallons

30x12x12 = 19 gallons.



As for glass tank with acrylic baffles... don't do it. Acrylic and glass don't bond well due to lack of adhesive made for both. You either need acrylic adhesive or glass adhesive. Use glass partitions you can get cut at any glass shop.

This is learned earlier in the summer while trying to get ideas for an internal overflow.

Rbacchiega
11-10-2010, 09:00 PM
alright alright alright...I stand corrected ha ha

blacknife
11-11-2010, 12:51 AM
30b too if your short on height.. 36x18x12 or so high, I was eying one up to squeeze into my stand for a project.