scherzo
07-13-2010, 06:01 PM
So I have a 2 tank in-wall freshwater setup that I will be converting to salt.
90 gallon on top and 75 sump below. The sump will have a viewable sump.
The original setup looks like this:
http://farm4.static.flickr.com/3072/2800760543_00708513f8_b.jpg
So the dimensions of the tank are
48" X 15" X 24" High
Not an idea size for a sump.
33" X 12" Fuge area
16" X 15" Drain / Skimmer Section
When you look at the video ignore the strange angle on the fuge section. That will be a straight notch. The tank will be drilled with a hole in the back of the return section.
The two white pipes are the drains from the tank. It is actually 1 drain with it split and will have a slower flow to the fuge.
I hope it works out for me. Any thoughts? Here is the video of the design. Please excuse the really bad Google Sketchup work.
http://www.youtube.com/watch?v=CGZEv79YMgU
90 gallon on top and 75 sump below. The sump will have a viewable sump.
The original setup looks like this:
http://farm4.static.flickr.com/3072/2800760543_00708513f8_b.jpg
So the dimensions of the tank are
48" X 15" X 24" High
Not an idea size for a sump.
33" X 12" Fuge area
16" X 15" Drain / Skimmer Section
When you look at the video ignore the strange angle on the fuge section. That will be a straight notch. The tank will be drilled with a hole in the back of the return section.
The two white pipes are the drains from the tank. It is actually 1 drain with it split and will have a slower flow to the fuge.
I hope it works out for me. Any thoughts? Here is the video of the design. Please excuse the really bad Google Sketchup work.
http://www.youtube.com/watch?v=CGZEv79YMgU