165 Gallon Mixed Reef Chapter Two.-Plumbing dry fitted

[bauder1986]

Well I finally managed to pick up that big tank from Simon's place. I feel for the guy, I really do, he is going to have nothing but spare time on his hands to design the next tank that will probably be larger and better than this one lol.

Anyways, seriously, this tank is frickin heavy! I had all the help I needed until I finally got all the pieces at home here and needed to get the tank onto the stand. Well guess what! Everyone dissapeared on me when I needed the tank up onto the stand!.

Well as determined enough as I was, I did not accept defeat and I got that huge tank off the floor and twenty feet into the air and up onto the stand, using no tools other than my own two hands.

Aside from a possibly fractured finger, and a pulled right bicep I got it up onto a stand so I can take those pictures for the fan base of this tank.

http://i645.photobucket.com/albums/uu172/bauder1986/P5280351.jpg
http://i645.photobucket.com/albums/uu172/bauder1986/P5280352.jpg
http://i645.photobucket.com/albums/uu172/bauder1986/P5280353.jpg

Anyways, Simon did a great start to this tank, and I plan on continuing that!


Oh yah and for those that do not know of this tank please follow this link and read up on Simon's 165 build thread. --->Simon's Way of building a tank! (http://www.canreef.com/vbulletin/showthread.php?t=57780)

[simplycoral]

Once you pick it up!

I might be tempted to start filling it with water again! :biggrin:

Seriously though. Good luck with the build. I shall be following it for sure!

Simon.

[bauder1986]

Oh yah, since some of you are going to ask the obvious questions on hardware and livestock, please wait till tomorrow for me to compile the list for you folks first.

I cant tonight because my arm and my finger seriously hurts lol

[kien]

That's dedication! ..

Tank On The Stand

Pros
- The Freaking Tank is On The Stand.

Cons
- Hernia
- broken toes/fingers, etc.
- various muscle strains
- thrown out back for a month
- medical bills to repair all of the above.

:lol:

[the marine apprentice]

well joshua. this is gonna be the move you have been waiting for for quite some time.
this is gonna be an awesome build and i wish i was down there to help out.

[bauder1986]

That's dedication! ..

Tank On The Stand

Pros
- The Freaking Tank is On The Stand.

Cons
- Hernia
- broken toes/fingers, etc.
- various muscle strains
- thrown out back for a month
- medical bills to repair all of the above.

:lol:

Hahaha yah, but good thing Im still young though, woke up this morning and the muscle strains were gone and the finger moves abit now.

well joshua. this is gonna be the move you have been waiting for for quite some time.
this is gonna be an awesome build and i wish i was down there to help out.

Thanks bud! dont worry I will take lots of pictures of the build.

[Leah]

Simply seen this tank somewhere before. :D

[lorenz0]

ha ha, awesome job moving the tank onto the stand by yourself. And good to meet you last week, ended up buying some of that sps

[bauder1986]

Simply seen this tank somewhere before. :D

Haha you sure did Leah

ha ha, awesome job moving the tank onto the stand by yourself. And good to meet you last week, ended up buying some of that sps

Awesome! Great meeting you to dude!. Yah that SPS is wicked stuff there for sure. Did you manage to get a whole colony of it or just a frags.

[Leah]

Very nice tank! :mrgreen: Can't wait to see it up and running.

[bauder1986]

Very nice tank! :mrgreen: Can't wait to see it up and running.

You and me both :smile:

[bauder1986]

Alright now down to the list of hardware and an idea of livestock

Hardware:

One of the proflux controllers, no budget for this one, so one of the good ones
matching 4 part doser, maybe 2
2 MP40
60'' ATI 12 bulb T5HO fixture
Bubble King Skimmer
two phosban reactors, one for carbon and one for zeovit rocks


The idea is to get this tank setup so it can run auto pilot but still inform my future IPhone on everything so I can monitor and adjust on my own if need be.


I am not running the closed loop, hence the 2 MP40's in the list. I like the light that John(lobsterboy) has for his tank, which is why I am copying him:razz:

I am going to run zeovit system, aside from the apparent headaches in doing so, the pro side is much better than the headaches.

Oh yah, I obviously have no budget to this tank build so yah, hence the shiney stuff lol.


Livestock.

Dominatly SPS on top of the aquascape with LPS and Inverts at the bottom.

Fish wish list.

Flame Angel.
Manderin Goby
Copperbanded Butterfly
Koran Angel
Bright orange starfish
and much more! Actually Ill take ideas on the fish part for sure.

[lastlight]

How on earth did you get it up all by yourself!? Should have had the camera rolling that's amazing! Nice planned equipList. You're off to a nice start with that sexy looking tank and stand.

[Greenmaster]

... seriously, this tank is frickin heavy! I had all the help I needed until I finally got all the pieces at home here and needed to get the tank onto the stand. Well guess what! Everyone dissapeared on me when I needed the tank up onto the stand!.

Well as determined enough as I was, I did not accept defeat and I got that huge tank off the floor and twenty feet into the air and up onto the stand, using no tools other than my own two hands.

Aside from a possibly fractured finger, and a pulled right bicep I got it up onto a stand so I can take those pictures for the fan base of this tank...

Good job on getting the tank up... For mine I don't think I can lift it... I got a crushed finger just getting it from the back of the truck to my floor... all we did was a guided slide down a ramp onto rollers... we had four people and couldn't lift it... Also I think your ahead of my build already... I've been working at it for months...
Thanks for the pictures will be following along :D

[bauder1986]

How on earth did you get it up all by yourself!? Should have had the camera rolling that's amazing! Nice planned equipList. You're off to a nice start with that sexy looking tank and stand.

The tank and stand is all credit to Simon. Oh and I got the tank up on the stand by hulking it out ahaha. Actually I managed to get one end up on to the stand first and then grabbed the other end and just fed it to the stand. It was hard work, but the end result is awesome.


Good job on getting the tank up... For mine I don't think I can lift it... I got a crushed finger just getting it from the back of the truck to my floor... all we did was a guided slide down a ramp onto rollers... we had four people and couldn't lift it... Also I think your ahead of my build already... I've been working at it for months...
Thanks for the pictures will be following along :D


Seriously bud, Im just building a tank. Not reinforcing the foundations, building my own rock, setting up an addition for a monster 320 gallon, your comming along just fine for your tank build bud. Thanks for the compliments though :smile:

[bauder1986]

Oh yah, I am adding a cooler and a power back up supply to this setup.

After a 32 degree day today, I need a cooler and I do live in Calgary so a power backup is in order for the controller and the fans.

Also, after the tank is set up and cycled, I am doing up a Regal Tang into this system.

[bauder1986]

Well, everyhardware store in town sucks except RONA. RONA on the Crowfoot is the place to go for all plumbing needs! Other than that, Kevin in Red Coral helped me out alot with the gate valve, the check valve and the four bulk heads!


So Got me plumbing in place, its going to be simple so dont try and overthink it!

This is the dry fit.

http://i645.photobucket.com/albums/uu172/bauder1986/df.jpg
http://i645.photobucket.com/albums/uu172/bauder1986/567.jpg
http://i645.photobucket.com/albums/uu172/bauder1986/6.jpg
http://i645.photobucket.com/albums/uu172/bauder1986/5.jpg
http://i645.photobucket.com/albums/uu172/bauder1986/2.jpg

Laters!

[andestang]

Mmmmm, a no budget build :wof:. I've seen this tank when it was Simon's, very nice. Looking forward to the end result.

[bauder1986]

Mmmmm, a no budget build :wof:. I've seen this tank when it was Simon's, very nice. Looking forward to the end result.

Yah Simon did a great job on this tank! Im stoked that Im the one that 'inherited' the tank.

Anyways, got the plumbing glued, im just waiting for my 'cautionary' sylicone layer to dry up and im going to position this tank over one of my main beams in my floor for a leak test tomorrow night!

[Greenmaster]

Yah Simon did a great job on this tank! Im stoked that Im the one that 'inherited' the tank.

Anyways, got the plumbing glued, im just waiting for my 'cautionary' sylicone layer to dry up and im going to position this tank over one of my main beams in my floor for a leak test tomorrow night!

Must have pics for the leak test too :D!

[the marine apprentice]

yeah josh pics of the leak test is crutial lol.
and if this is a no budget build then im sure i can burn a few ideas in ur head for you haha.

[bauder1986]

Must have pics for the leak test too :D!

Ok Ok ill get pics of it tonight.
yeah josh pics of the leak test is crutial lol.
and if this is a no budget build then im sure i can burn a few ideas in ur head for you haha.

Im sure you could!

[The Grizz]

I will guess that you found all the plumbing parts you where looking for?

[bauder1986]

I will guess that you found all the plumbing parts you where looking for?

Sure did, had to go to RONA by RC and to RC for all my plumbing, I couldnt get hold of that place you mentioned.

[bauder1986]

Leak Test complete!

No Leaks and my tank didnt punch a hole through the flour and land in my basement....actually my flooring didnt even budge under the weight, i was running donw to the basement and check ceiling hieghts and levels and no change at all:biggrin:

http://i645.photobucket.com/albums/uu172/bauder1986/gggggg.jpg
http://i645.photobucket.com/albums/uu172/bauder1986/ggg.jpg
http://i645.photobucket.com/albums/uu172/bauder1986/gggg.jpg
http://i645.photobucket.com/albums/uu172/bauder1986/gg.jpg

[Greenmaster]

Sweet!

[The Grizz]

Nice job Josh, but I would think twice about a Copper Ban Butterfly if I was you. I have had 2 now in my 8' tank, both ate mysis like a little piggy but then stopped eating suddenly and died. Some people have had great luck with them but the track record is not good.

I would get a Sailfin Tang, a Powder Blue Tang and a Naso Tang in that big boy.

Just my opinion.:biggrin:

[simplycoral]

Looking Good Josh! :biggrin:

When will you be starting the Cycle?


S.

[bauder1986]

Sweet!

I know eh!

Nice job Josh, but I would think twice about a Copper Ban Butterfly if I was you. I have had 2 now in my 8' tank, both ate mysis like a little piggy but then stopped eating suddenly and died. Some people have had great luck with them but the track record is not good.

I would get a Sailfin Tang, a Powder Blue Tang and a Naso Tang in that big boy.

Just my opinion.:biggrin:

Alrighty then, I'll have to load up on cleaner shrimp then to attack any aptasia that may appear in my tank then.

Looking Good Josh! :biggrin:

When will you be starting the Cycle?


S.

Well, Ihave to get a few more things in order first, the light, substrate, more rock, a sump pump, skimmer, zeo reactor and all my zeo product.

Im hoping mid august i can start the 14 day zeo cycle.

[Edmonton newbie]

load up on cleaner shrimp? hmmm are you planning a big ich tank? im thinking you want peppermints there

[bauder1986]

load up on cleaner shrimp? hmmm are you planning a big ich tank? im thinking you want peppermints there

Yah I ment that haha. Lots on the mind lately I cant say everything right the first time!