My Reef

[reefcanada]

This is my reef tank. It is still a work in progress. But arn't they all? The tank is 72x30x20, the tank was built by someone else and is the last tank in my house that I didn't build. I have been building a lot of nice tanks for people and am sick of looking at this tank. So in the near future I am going to be building a new tank. The new tank will have the same foot print but be 22" tall. With a piece euro, all edges polished, with the returns in the euro.
Enjoy Jay.IMG]http://i997.photobucket.com/albums/af97/reefcanada/001.jpg[/IMG]

[catchandrelease]

http://i997.photobucket.com/albums/af97/reefcanada/001.jpg

[catchandrelease]

very cool, I like the look of the two seperate reefs.
What equipment are you running?

[plutoniumJoe]

Great looking Tank! I also love the Tang in the bottom right of the picture. I look forward to seeing this progress.

Joe

[reefcanada]

I am running an eight bulb 48" tek light. Look to upgrade to a ten bulb 60" ATI or a fourteen bulb 72" aquactinics. I am waiting on my ATI bubble master 250. I have a pos euroreef rs180 on it right now and I hate it. There is a reefkeeper two to control the lights and pumps. the main pump is a little giant 4-MDQX-SC, additional flow is by four koralia four's and a three. all of the power heads turn off with the bright lights and turn back on with them. I am not sure if this helps or hinders, but it seems to be working for me. The sump is 48x24x18 with a 20 gal fuge built in. I am running bio pellets in a large deltec reactor, but only half the recommended amount. This seems to be allowing my cheato to keep growing and not die off. I am also running a tunze ato and dossing is done when needed manually. Jay

[abcha0s]

More pictures please :smile:

[karazy]

this tank is outstanding.
i have seen it in person a few times and it always looks top notch, and lately it has been looking better and better everytime i see it.
great work jay, as always it looks beautiful.

[mseepman]

Very nice tank...I really think the two islands give it a nice look.

[Doug]

Great looking tank. Also like the fact you reside in there. :D

Is the center piece a corky sea finger gorgonian or a leather?

[reefcanada]

Thanks guys, I sleep in my 400 gal. The reef is a little small. The center coral is a finger leather.

[lastlight]

Really nice man. How many gallons total are you living with now?

[reefcanada]

In the house or just that tank?

[reefcanada]

http://i997.photobucket.com/albums/af97/reefcanada/IMG_0785.jpg

http://i997.photobucket.com/albums/af97/reefcanada/IMG_0767.jpg

http://i997.photobucket.com/albums/af97/reefcanada/IMG_0766.jpg

http://i997.photobucket.com/albums/af97/reefcanada/IMG_0764.jpg

[reefcanada]

Here is a little update on my softie tank. My new tank only one hour old. Let me know what you think, Thanks

http://i997.photobucket.com/albums/af97/reefcanada/mynewtank026.jpg

http://i997.photobucket.com/albums/af97/reefcanada/mynewtank030.jpg

http://i997.photobucket.com/albums/af97/reefcanada/mynewtank029.jpg

And my helper wanted his picture posted as well. He was a little dirty that day.

http://i997.photobucket.com/albums/af97/reefcanada/mynewtank008.jpg

[Delphinus]

It looks a little more 3dimensional than when I last saw it. :lol:

Anyhow, looks awesome!

[lastlight]

Pimpin' ain't easy but it sure is hella sexy. Internal overflow so you can get that beast against the wall?

And what besides the euro is starfire?

[reefcanada]

Thanks guys, just the front panel is starphire. You won't see the sides, so there was no point in making anything else starphire. I made the overflow a little shorter so that I can run a wave box and get a good size wave. I am trying to limit the amount of gear in this tank. I hope the hammerhead pump and wave box will be enough flow.

[lockrookie]

<-drrooooling i like the overflow with the etched glass nice touch

[reefwars]

wow looking good jay your reef is gonna be happy:):)

[lobsterboy]

yes, this looks wicked. the one piece is dope.

[reefcanada]

Thanks Jon, that means alot as your tank is always one of great inspiration.

[reefcanada]

These are the last pictures of my softie reef before I move it too it's new home.

http://i997.photobucket.com/albums/af97/reefcanada/014.jpg

http://i997.photobucket.com/albums/af97/reefcanada/016-1.jpg

http://i997.photobucket.com/albums/af97/reefcanada/018.jpg

http://i997.photobucket.com/albums/af97/reefcanada/019.jpg

http://i997.photobucket.com/albums/af97/reefcanada/026.jpg

[jimbo222]

wow nice setup Jay ,and good luck with the move im sure it will go smooth.I have some reserve salt water if you run in to trouble or need a hand let me know.
jim

[reefcanada]

Thanks for the offer, but I will be using all the old water plus I will have 200 gallons of fresh made up. Just in case.

[lastlight]

Jay's camera: 1
Jay: 0

In other words pics once again do that tank justice!

[reefcanada]

They sure don't, maybe one day I will out smart the camera.

[reefwars]

Jay's camera: 1
Jay: 0

In other words pics once again do that tank justice!





They really don't I've seen all the pics and it's nothing like seeing it in person, looks like some coral has been added lately??? Nice paly's I just got a 2head frag I'm hoping grows into that :)

[reefcanada]

Well I showed you pics of the new tank this reef "WAS" going to be going into. That is no longer the plan, I have now thought about this tank to much. Most of these corals are already out growing this tank and the new tank was going to be the same foot print just taller. That new tank was not going to do much for the corals.

So here is the new plan, the display tank will be 72'(L) x 48' (W) x 26"(H). The front and one piece eurobrace will be optiwhite. Optiwhite is clearer and softer that starphire, but I can get 15mm sooner that 15mm starphire. I am going to be doing a single rear overflow, with two 2" and one 1 1/2" drains. A double 12mm bottom with the top panel tempered.

The sump will be 60"(L) x 30"(W) x 16"(H). It will have a built in fuge and filter sock holders, with a nice big area for reactors and skimmer. The stand will be steel and I will make it 36" tall.

I am still debating on a closed loop system? I have two 24" LTA and we all know they love to find the intake of powerheads. I am concerend that they will find the intake of closed loop. I have a reeflo hammerhead pump, I may just try the same style that I was planing on the previous tank. Then use some powerheads for added flow if needed.

I will be running bio-pellets on this system as this tank already has them and they work well for this tank. The skimmer will be an ATI bubble master 250. Lighting will be 2- 48" x8 bulb tek T5HO's.

There will be a controller on this tank, I have a reef keeper 2 on this tank at the moment, but I may up grade to the RKE. I think that is about it, I hope to have this tank up for after Christmasor before if I can swing it. Thanks

[lastlight]

Can't wait to see it man. Let me know if you need hands to help move stuff out or in as you get going on this. I'll be there.

[reefcanada]

Thanks Brett, you are first on the list. I think this is going to happen fast. The eels are gone, the 200 is now shut down and the sale is pending. I have ordered the opti-white for the front panel and one piece eurobrace. Then next step is to move my 400 gal fw tank into the place of the 200. Thenk I can get the stand ordered and in place.

[lastlight]

Order the stand? You going metal for this one too?

Fast and furious progress. I'm not familiar with it but I do like it!

[reefcanada]

Yes I am going steel, I will get two stands made and then just bolt them together. I had to do that with the 400 I already have. Works great.

[reefcanada]

I have been thinking about the flow in this tank alot. I am going to by-pass the closed loop. I like my nems way too much. I am going to run three of the vertex moceans in the eurobrace and thenfour 6105' or 6205's. ( not sure on that one yet) on the sides. They will be run of of the tunze controller. I hope this will work well.

[Triggz]

That's a hell of a lot of flow!! Guess you need it with 4 FOOT deep tank!! :lol: Have you seen the Vertex Moceans in action?

Can't wait to see this bad boy set up.

[reefcanada]

Well, it's been awhile and alot has changed. I had to buy a new truck for work. So I am not going with a bigger tank for now. I am going to set up the 250 gal. I got the new stand and went with 36" tall, I like the room under the stand. I got the new sump built finaly and will have the tank up and running over the christmas break. Here are a few pictures of the new sump, return pump and my new to me skimmer. All I need to add is the filter sock holders. Enjoy.

http://i997.photobucket.com/albums/af97/reefcanada/001-3.jpg

http://i997.photobucket.com/albums/af97/reefcanada/003-2.jpg

[reefwars]

looking good buddy, that skimmer is mean lookin lol :):) your keeping the starphire now??

[reefcanada]

Yes I am, I just can't do anything else right now. Plus the live stock isn't liking the smaller tanks.

[reefcanada]

I hope every one had a great christmas and got lots of good stuff. The tank is finaly up on the stand and in place. I got all of the plumbing done, except for the drains. I forgot to get 2" pipe, I have all the fittings. Just need the pipe. I got the dry rock I had and the sand in. Tomorrow will be the drains installed and then fill it up. Here are a few pics.


http://i997.photobucket.com/albums/af97/reefcanada/006-2.jpg

http://i997.photobucket.com/albums/af97/reefcanada/005.jpg

http://i997.photobucket.com/albums/af97/reefcanada/004-1.jpg

http://i997.photobucket.com/albums/af97/reefcanada/007-2.jpg

[lastlight]

White bg I've rarely seen that I think that could look killer man. Great idea with the valves on the returns. I found 90% of my flow went to the outer outlets and valves would have been nice.

[Lampshade]

Great looking tank. You'll love the ATI skimmer, if you don't already.

[Delphinus]

What's the controller on the left for?

Wow that is a big pump. I like how your sump is sized appropriately so it can fit in the stand. Wish I had thought of that when my sump was in tiny little pieces being rebuilt. Whose idea was it to rebuild it the same size as before? Darn it all. Tanks as nicely laid out and thought/planned out as nice as this make me hate my own tank that much more. Thanks a lot Jay. Thanks a lot. :p

Good luck with the rest of the build, looks like a fun project.

[reefcanada]

Sorry Tony, Lmao.

The controller on the left is my reef keeper two. I like it way better than my RKL. For a softie tank it works very well and the screen is way eaiser for me to read. Thanks For the kind words every one.

[Cliff]

Great looking set-up so far

[reefcanada]

And we have water. The Hammerhead pump works like a charm. I am super glad I lowered the overflow, cause the water level is at a normal level. I will get pics up in the morning.

[globaldesigns]

Hey Jay, great looking new tank...

It was a pleasure seeing you today in the store today.

[lobsterboy]

hey Jay

i really like whats going on here, the rock work, sump and tubes look great.

when are the new pics coming ???

[reefcanada]

Here you go Jon. I need to fix one of the returns, there is leak in one of the conections. So now I am getting micro bubbles in the tank. It is driving me crazy. Enjoy.

http://i997.photobucket.com/albums/af97/reefcanada/001-5.jpg

http://i997.photobucket.com/albums/af97/reefcanada/003-4.jpg

http://i997.photobucket.com/albums/af97/reefcanada/004-2.jpg

[reefcanada]

I was asked to update my thread, so here you go lastlight. A few updates on gear, in may or so I got new lights(thanks Jon-lobsterboy) an 8 bulb 80watt ati power module. This light rocks, well worth every penny. I also added a reactor to run phosban. I am not sure if I will add any more bio-pellets, the tank is running on it's own now. Here are a few pics, enjoy

http://i997.photobucket.com/albums/af97/reefcanada/newtankphotos001.jpg

http://i997.photobucket.com/albums/af97/reefcanada/newtankphotos006.jpg

[lastlight]

Wavebox and 5 eductors you must have some nice flow in there!

Everything looks happy in there thanks for the update bro.

That a Vlamingi?

[Delphinus]

That is one nice filled in reef Jay!! Very nice. What pump do you have pushing those 5 eductors?

[reefcanada]

I am only running a dart. I am also running a reactor and uv off of the same pump. The eductors are working really well.

[reefcanada]

It has been a long time since I posted on my thread. It has grown in alot to say the least. Here are a few pics of the tank now, please enjoy.

http://i997.photobucket.com/albums/af97/reefcanada/newphotos532_zpsc5a9576b.jpg

http://i997.photobucket.com/albums/af97/reefcanada/newphotos533_zps21f64304.jpg

http://i997.photobucket.com/albums/af97/reefcanada/newphotos534_zpscfab2b1d.jpg

http://i997.photobucket.com/albums/af97/reefcanada/newphotos538_zps68587d0e.jpg

[lastlight]

Holy colonies jay! That's looking rad great to see you surface :)

[gtreef]

Wow, absolutely stunning!

[frizzo1983]

This tank is so sick and deserves tank of the month when was the last time you seen a softie tank put together this nice, well done Jay looking forward to my build.

[kien]

Wow, it's a jungle in there!! So awesome! I want one!

[zhasan]

This is one of the best softie tank I've seen!!

[reefermadness]

Really nice softie tank...!!!