PDA

View Full Version : PC lighting to fit 23" area

Chad
09-09-2003, 07:10 PM
Ok,

I have an Eclipse 2 hood for my 20g reef setup.. recently the dumb stock light blew on me but they are shipping a replacement :evil: . Unfortantly I am out of a light right now. I want to build something to fit into this Eclipse hood, the width is maybe 4" max with a length of 23" or so. Does anyone have a recommendation on what I can use? BTW, looking to max out the wattage if possible.. without going overboard :biggrin:

Thanks

Chad
Nullig
09-09-2003, 09:04 PM
I believe CSL has a retro fit kit which fits the eclipse 2 perfectly.
Chad
09-09-2003, 09:10 PM
I believe CSL has a retro fit kit which fits the eclipse 2 perfectly.

Ya, I may be getting that as well... but I am looking to add something that fits the small space behind the stock light.. trying to increase my lighting beyond what that offers.

thanks

Chad
Wilty
09-09-2003, 09:13 PM
I never liked the retro fit stuff. I always ended up building a top canopy out of wood. Doesn't take long if you have the tools and you keep it simple. Then you could even hide a MH in there with a pair of vent fan. ROAR.
Samw
09-09-2003, 09:20 PM
Ya, I may be getting that as well... but I am looking to add something that fits the small space behind the stock light.. trying to increase my lighting beyond what that offers.

thanks

Chad


Would a 55/65W PC lamp not fit in there? Otherwise, the 38/32W PC lamp should.
Chad
09-09-2003, 10:13 PM
I was thinking of getting this..

http://www.jlaquatics.com/cgi-bin/shopping/jalstore.cgi?user_action=detail&catalogno=pfo-pfbel12

The 2 x 55w one

not sure if its the most cost effective tho..

whats do you guys think?

Chad
AJ_77
10-06-2003, 05:00 AM
That looks OK, but a Workhorse 5 will run 2x55 PC (I have that running over a 20), and it must be at least a little cheaper.
Chad
10-06-2003, 06:24 AM
That looks OK, but a Workhorse 5 will run 2x55 PC (I have that running over a 20), and it must be at least a little cheaper.

Maybe.. but its all done now tho .. I am in the process of finishing a hood to hold these puppies in. I actualy took the reflecter.. attached some aluminium and a handle to it. Works great cuz I just grab a handle and move my lights around.. no burning touch :eek: Here is a pic

http://members.shaw.ca/cmcd/PC-Lighting.jpg

http://members.shaw.ca/cmcd/PC-Lighting-2.jpg

The metal feet will be gone once I complete my hood. Right now it is resting on a glass lid.

Chad