View Full Version : Weldon 40 & Aquarium Construction
mr_alberta
05-14-2009, 10:59 PM
Anyone have any experience with weldon 40? I was pretty set on using Weldon 4 to build my tank but the salesperson at the shop told me I should be using 40 instead. This is a display tank so the edges must look good and be bubble free and most importantly strong. Any help or tips would be greatly appreciated.
Cheers,
-Harvey
It's good.
It's very strong and clear.
You have to mix 2 parts like epoxy.
Strong fumes though.
spoot
05-15-2009, 12:03 AM
Use it in a well ventilated area. If I recall correctly, the fumes are highly carcinogenic.
mr_alberta
05-15-2009, 05:03 AM
Do you apply it like you would silicone? Onto the edge of the piece then push together?
Funky_Fish14
05-15-2009, 05:35 AM
Harvey, if you wanna test some of mine out sometime, feel free to shoot me a PM. I can bring the kit over - actually I could bring over #4, 16, and 40... you can see what you like and what would work best for you? I have ample amounts of each so I can spare a few test runs. :)
Cheers,
Chris
vBulletin® v3.7.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.