brizzo
04-17-2009, 05:25 AM
Freshly cut piece
http://nazerine.reefbc.com/photos/041609/P4160004.JPG
Clamped into handy work stand ($15 canadian tire), going to heat up with heatgun and bend 90 degrees
http://nazerine.reefbc.com/photos/041609/P4160005.JPG
It needs to be hot hot hot. Used insulated gloves to bend over once nice and hot. Slowly and evenly heat both sides. Over bend it just a bit, acrylic rebounds back as its cooling. Clamp or hold in place as it cools.
http://nazerine.reefbc.com/photos/041609/P4160006.JPG
Tada, overflow!
http://nazerine.reefbc.com/photos/041609/P4160007.JPG
Return, drain, and backup drain (3/4 bulkheads from BRS). Going to drill a hole through the side of the overflow without teeth for the return, once I've dry fitted the plumbing.
http://nazerine.reefbc.com/photos/041609/P4160010.JPG
I may have cut the teeth a tad too low, but I can just install a piece behind the teeth to adjust the water height. It will be much better once siliconed, and back painted black :mrgreen:
http://nazerine.reefbc.com/photos/041609/P4160011.JPG
It's a standard 20g high
http://nazerine.reefbc.com/photos/041609/P4160004.JPG
Clamped into handy work stand ($15 canadian tire), going to heat up with heatgun and bend 90 degrees
http://nazerine.reefbc.com/photos/041609/P4160005.JPG
It needs to be hot hot hot. Used insulated gloves to bend over once nice and hot. Slowly and evenly heat both sides. Over bend it just a bit, acrylic rebounds back as its cooling. Clamp or hold in place as it cools.
http://nazerine.reefbc.com/photos/041609/P4160006.JPG
Tada, overflow!
http://nazerine.reefbc.com/photos/041609/P4160007.JPG
Return, drain, and backup drain (3/4 bulkheads from BRS). Going to drill a hole through the side of the overflow without teeth for the return, once I've dry fitted the plumbing.
http://nazerine.reefbc.com/photos/041609/P4160010.JPG
I may have cut the teeth a tad too low, but I can just install a piece behind the teeth to adjust the water height. It will be much better once siliconed, and back painted black :mrgreen:
http://nazerine.reefbc.com/photos/041609/P4160011.JPG
It's a standard 20g high