Shut down, Tanks for sale

[BlkWolfe]

96x30x32 Acrylic aquarium (400g), 2 years old, dual rear corner angled overflows, 3/4" thick sides, 1/2" top/bottom. Weighs approx 480lbs. Includes home made stand and all plumbing - $1600

84x28x24.5 Glass aquarium (244g), dual rear corner overflow boxes, euro braced, includes black steel stand - $600

60x23x19 glass sump (110g) - $150 (sold)

48x24x20 glass frag tank (95g), euro braced, rear center overflow box - $200

24x24x20 glass semi cube (50g), black trim, 1/2" bottoms, includes glass lids - $80

three standard 20's, and two standard 10's, plastic home made lids for a few - 0.75 cents per gallon

Serious inquiries pls PM me for pics. Located in north Edmonton, transport to calgary/vancouver/wherever can be arranged. Transport for large tanks to anywhere in BC/Alberta/Sask can also be arranged for my cost of fuel.

[GreenSpottedPuffer]

Nice tanks. I would take the 244 in a heartbeat if you were here in Vancouver. That would be perfect to replace my 240 which is acrylic and going to scratch too much with my puffers.

[saltwater-virgin]

Hi Josh,

We would be interested in one of your 50 gal semip-cubes. Also a 10 gal.

What is the condition and What is your number so we can arrange pick up.

Thanks
Tanya

[workn2hard2day]

pm sent (244)

[BlkWolfe]

Updated...and bump

[Sam1969]

do you still have the 50g ? is it drilled ? can it be ?

[adidas]

still have the 400g? any pics, any way it could be brought to calgary?

[ElGuappo]

still have the 400g? any pics, any way it could be brought to calgary?

If your making a run to calgary i may take 2 20's

[Phanman]

ill take 2x 20's as well if your coming to calgary

[BlkWolfe]

I'll be in calgary this weekend, and possibly the weekend of nov 8th. The 400 and stand/whatever will fit in one load, i just need bodies to take it out my back door and out the back gate into the truck.

Adidas, pm me your email address, ill send some pics.

i found another 20g and 10g in my closet, which makes three 20's atm...apparently i havent been in there for awhile. Phanman, I'll bring down two for you this weekend, and ElGuappo pls PM me if your interested in the 3rd. I'll be in the sw corner of calgary, we can meet up there or downtown if it works for you guys.

Sam, the remaining cube isnt drilled, but its all plate glass so no reason you cant.

[Phanman]

sounds good

[BlkWolfe]

i keep forgetting to mention, the plumbing for the 400g is NOT glued together and has about $200-$250 worth of true union ball valves, if not more.

[adidas]

tank looks cool man. any scratches?

[BlkWolfe]

Theres some of the light scratching/hazing on the top left from cleaning with a magnet, but you have to look at certain angles to actually see it. Also a small nick in the bottom right corner about 1/4" long from me dropping a rock the first day i had water in it. That one blended into the sand, so its another one you have to look for.

My calgary trip was interupted for this weekend. I should be down on saturday nov 1st now, and have room for more tanks if anybody else wants delivery.