PDA

View Full Version : Coralife Light hanger.


cav~firez22
12-08-2007, 08:54 PM
Well, my new 6ft Coralife light went swimming in my tank today. one of the hanging parts shattered, well ripped apart along the threads and half the light dropped in the tank. Does anyone know if Coralife warrenties crap like this, or am I S.O.L.

the light works still, now that i dried it out, but smells funny :S

i have crabs
12-09-2007, 04:26 AM
i think id be so mad id smash the light, but since you didnt what where you using to hang it? the actual hanging kit shouldnt give problems if used properly or did you have something riged up?

Skimmerking
12-09-2007, 04:29 AM
take pictures of the hanging beacket and email them ......

cav~firez22
12-09-2007, 02:49 PM
i used it as the instructions stated. nothing was rigged up.

now one side is rigged up. i will take pics shortly, as soon as i can locate my camera.

i have crabs
12-09-2007, 03:00 PM
did the wire slip out of the little clamp? you can replace the wire with a gear cable from a bike for $2.50 if its wrecked but mabey you just didnt have the screw tight enough to hold the wire in place.

cav~firez22
12-09-2007, 03:32 PM
Found the camera,..

ok. the little nipple thing that you would press in to lower the light

Here is a shot of the good side.
http://i5.photobucket.com/albums/y175/d3vil_Z22/TEMP/DSC08490.jpg

http://i5.photobucket.com/albums/y175/d3vil_Z22/TEMP/DSC08491.jpg

http://i5.photobucket.com/albums/y175/d3vil_Z22/TEMP/DSC08492.jpg

http://i5.photobucket.com/albums/y175/d3vil_Z22/TEMP/DSC08493.jpg

http://i5.photobucket.com/albums/y175/d3vil_Z22/TEMP/DSC08494.jpg


Here is the broken side.
The threads on this piece split. i could actually take the light down again and take a picture of whats left.
But im not removing it until new hanging kit arrives.
http://i5.photobucket.com/albums/y175/d3vil_Z22/TEMP/DSC08496_0.jpg

http://i5.photobucket.com/albums/y175/d3vil_Z22/TEMP/DSC08495.jpg

http://i5.photobucket.com/albums/y175/d3vil_Z22/TEMP/DSC08496.jpg

http://i5.photobucket.com/albums/y175/d3vil_Z22/TEMP/DSC08497.jpg

i have crabs
12-09-2007, 09:51 PM
so was it the cable that frayed or was it a problem with the chrome thing that holds the cable?

cav~firez22
12-10-2007, 04:24 AM
Chrome thing that holds the cable. it split in half.

i have crabs
12-10-2007, 12:52 PM
mabey the nut was over tightened?

cav~firez22
12-10-2007, 01:18 PM
nope, could slide it both ways in the holder.

i have a new one waiting for me now thanks to Dan @ Hidden Reef.

kwirky
12-10-2007, 08:05 PM
I didn't trust that hanger so I whipped up a couple of these from home depot. VERY strong! lol

http://www.kwirky88.com/images/aquarium/hanger.jpg