PDA

View Full Version : Water flow


J.Lloy
10-23-2007, 04:29 PM
I'm just wondering what different people have for flow rates in what size of tank and would you want more?

Der_Iron_Chef
10-23-2007, 04:36 PM
It's more a question of, what are you keeping in the tank?

J.Lloy
10-23-2007, 05:13 PM
anything or everything doesn't matter at this point for me, guess I should have added also what is your main coral type

Murminator
10-23-2007, 05:39 PM
I use a 9.5 mag return and the big hydor and I used to also run a seio 1100 in my 90 but I recently took it out and I think i'll keep it out give the fish and coral a break

digital-audiophile
10-23-2007, 05:41 PM
In my 90, I get a little bit of flow though mostly aeration from the return line on my sump, I have to Hydor Koralia 4's on both sides of the tank for flow. I am thinking about adding a Koralia 3 in the middle of the back wall to add a little more mixed flow. I'm not keeping SPS right now so the flow is not as vital and with my sand bed it is a challenge to adjust the flow so it doesn't stir it up too much.

Jason McK
10-23-2007, 06:11 PM
in my 370G I have a hammer head return split into 3. 2 wavey seas and regular lockline on the 3rd. The hammer head also feeds my chiller that returns to the sump and a 30G frag tank that also returns to the sump.
I use a Ocean Motion 4way on a closed loop drived also by another hammer head pump. There are 12 outputs to the closed loop that have on off functions depending on the OM 4way

J

Joe Reefer
10-23-2007, 06:41 PM
In my 120 (48x24x24) there is a tunze wavebox, two 6100 and a 6000 tunze stream.

michika
10-23-2007, 06:42 PM
24g nano - mag 7 return on a SWCD, and a hydor koralia 1. SPS & clam dominated

28g nano - Snapper (2400gph), on a Calfo manifold. Will be SPS & clam dominated.

mark
10-23-2007, 07:48 PM
145g BB mixed reef. Dart (3600gph) on a CL with OM 4 way, plus a Iwaki MD-70RLT on return (with head I'm still flowing ~1000gph).

How tank is laid out (returns and rock) think I'm about max for flow as getting difficult to find lower flow areas for stuff like LPS and clams.

SeaHorse_Fanatic
10-23-2007, 08:27 PM
On my 210g LPS dominated reef, I have a Hydor Koralia4 (1200gph), 2 @ Tunze Nanostream 6045s (2x1100 gph), a Mag7 return split 2 ways (500 gph), and a Sedra 9000 return (700 gph). That's approximately 4600 gph flow after head loss, and all the flow is higher up in my tank.

Anthony

fkshiu
10-23-2007, 10:13 PM
On my 135 mixed reef (72x24x20) I have one Tunze 6000 on a single controller (1850 gph) plus an Eheim 1260 return split three ways (one looped back into the sump (~400 gph back into the tank).

That's not all that much but I have less live rock than most others have in tanks of this size and the rock is arranged to allow for Gyre-type flow - think of a racetrack with the water circling around the track and the rocks in the middle infield. So I've been able to get away with less gph and powerheads.

saltynuts
10-23-2007, 10:48 PM
tank size 56 gal 36x18x20.
mag 12 return.
mag 18 closed loop on a scwd
total flow around 2360.

Moogled
10-24-2007, 12:22 AM
33 Gallon LPS and SEIO 620 (or maybe 820).

YEAH BABY

Der_Iron_Chef
10-24-2007, 12:24 AM
2 x Koralia 3's in my 55G. Oh, and the awesome flow from both the Phosban Reactor and the Skimmer.

How 'bout them apples?

eddtango
10-24-2007, 12:31 AM
My 125 gal. SPS dominated tank has 2 x Tunze 6100 w/ single-controller, Tunze wavebox and 2 x Koralia 4. I also have SEDRA 9000 for my return.

DanG
10-24-2007, 04:21 PM
on my current 40 I've got a korilla 3 and a korilla 1. The skimmer adds some flow, but not a lot, maybe 225gph, at least that's what the pump is rated for.

On my new 70 that I've ordered, I am planning on running 500gph on the return line from the sump and moving the korilla 3 and korilla 1 over to the new tank. I'll probably dump the 1 and replace it with another 3 or maybe step up to a 4. It's a lot of softies and LPS with a single SPS.

michika
10-24-2007, 04:45 PM
24g nano - mag 7 return on a SWCD, and a hydor koralia 1. SPS & clam dominated

28g nano - Snapper (2400gph), on a Calfo manifold. Will be SPS & clam dominated.

oops, I forgot to answer the whole question...for the first one I would love more flow, but none on the second one.