I had to throw my underwear into the laundry just now...

[albert_dao]

http://i195.photobucket.com/albums/z264/albert_dao/Royal%20Exclusive/Lager2081.jpg

http://i195.photobucket.com/albums/z264/albert_dao/Royal%20Exclusive/Lager2061.jpg

http://i195.photobucket.com/albums/z264/albert_dao/Royal%20Exclusive/Lager41.jpg

http://i195.photobucket.com/albums/z264/albert_dao/Royal%20Exclusive/Lager31.jpg

http://i195.photobucket.com/albums/z264/albert_dao/Royal%20Exclusive/Lager11.jpg

http://i195.photobucket.com/albums/z264/albert_dao/Royal%20Exclusive/Werkstatt31.jpg

http://i195.photobucket.com/albums/z264/albert_dao/Royal%20Exclusive/Werkstatt11.jpg

Klaus sure has his stuff together eh?

[Der_Iron_Chef]

(I had to throw my underwear into the laundry just now...) X 2.

Daaaaaayum.

[Mik_101]

SKIMMER LAND....and much much more. lol

[Justusfish]

why use the laundry? A couple of spins in the giant skimmer and they'll be as good as new

[michika]

*drool*

Its like a toy store, but for reef addicts!

[christyf5]

Wow, thats like a reefers candy store eh?:biggrin:

[Delphinus]

How did this person get into my basement to take pictures of it????

[Mik_101]

Tony NICE BASEMENT man.

[fkshiu]

Check out all the Hagen boxes sitting on the ground. Lends credence to the rumour that the vaunted Red Dragon pumps are merely Hagen (yes, Hagen) pond pumps with customized impellers and volutes.

[argileh]

what brand are these skimmers

[Raf]

I laughed at the pic with the calculator on the desk.....money money money....!!!!!

[fkshiu]

what brand are these skimmers


They're Bubble Kings:
http://english.royal-exclusiv.de/skimmer-Bubble-King.htm

Here's some US pricing:

http://www.captiveoceans.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=CO&Category_Code=Bubble_King

(now you know why Albert got his knickers in a knot . . .)

[ClubReef]

Imagine if one of the racks toppled over....

[Mik_101]

That wouldent be very fun. At all.

[fkshiu]

Imagine if one of the racks toppled over....

It's half cm-thick cell-cast acrylic: should be manly enough to survive the bump.

[Chin_Lee]

Looks like the part number is PT352VDE but nothing comes up on online search

Check out all the Hagen boxes sitting on the ground. Lends credence to the rumour that the vaunted Red Dragon pumps are merely Hagen (yes, Hagen) pond pumps with customized impellers and volutes.

[muck]

Looks like the part number is PT352VDE but nothing comes up on online search

Maybe not but Hagen does have a model PT-352 pond pump. Im guessing the "VDE" is for the special mods that were done (if the rumour is true).

http://www.hagen.com/canada/english/ponds/product.cfm?CAT=30&SUBCAT=3011&PROD_ID=03003520010101

[albert_dao]

The pumps are of the same lineage as the Laguna Maxflow series. However, they're custom manufactured by Askoll for Royal Exclusive. Hahnmeister on RC went through a lot of work trying to replicate them with stock Laguna pumps. Not quite the same, but he came close with a lot of effort.

[muck]

Thanks for posting the photos Al-B!! :biggrin:

[ClubReef]

how much are the stock Hagens?

[albert_dao]

$100 - $225. But you won't get the head pressure of the RD's by modding them.

[fkshiu]

how much are the stock Hagens?

http://cgi.ebay.com/Laguna-Pond-Max-Flo-1500-Waterfall-Filter-Pump_W0QQitemZ140131470067QQihZ004QQcategoryZ13475 0QQcmdZViewItem

[Chin_Lee]

I believe the volute is also modified to accomodate the PF4 mesh

[albert_dao]

That and the increased airflow. Keep in mind that Hahn's mods were geared towards producing a GREAT skimmer pump, not a GREAT return pump, which the RD's are.

[support@proline]

Albert thank you for posting these pictures.
Klaus was kind enough to send us some pictures from Royal-exclusive factory In Colonge Germany.
I will ask Klaus again in regards to the similarities of the 2 pumps ,but I can assure you that they are not the same,Albert is right about the skimmer pump & RD difference & also thse are the new generation RD & the new ocean simulators that will hit the market by the end of september.
http://i28.photobucket.com/albums/c220/reeftec/rd2.jpg
http://i28.photobucket.com/albums/c220/reeftec/rd3.jpg
http://i28.photobucket.com/albums/c220/reeftec/rd4.jpg
http://i28.photobucket.com/albums/c220/reeftec/rd4-1.jpg
http://i28.photobucket.com/albums/c220/reeftec/rd5.jpg
http://i28.photobucket.com/albums/c220/reeftec/rd6.jpg
http://i28.photobucket.com/albums/c220/reeftec/rd7.jpg
You can see the different motor blocks being tested for a log time here also,tested in hotwater ,SW,also you can see the dimmable reddragon brushless,DC pump with the controller ,We will be showing these products @ MACNA ,the dimmable pumps are what we really excited about ,I will try to get a couple of pictures of different cross current wave designs in German Tanks using this system.
Regards
Jason

[support@proline]

This is my own tank I am in the process of setting up ,
In the bottom picture you will see the 2 holes which will be used as an intake for an RDII pump ,the pumps will be dimmed @ opposite so
pump A 100% -------pump B 0%
pump A 0%--------pump B 100%
so you will create suction out of different holes in different amounts in a set period.
The holes on the overflow pane will be used as the output in a cross patteren,so the one line will blow the other @ 0 & vice versa.
This will eliminate the need for any Oceanmotions,Wave box & other methods ,the currents changes are alot more gentle & also the current will become less directional & more irregular

[albert_dao]

The, uhhh, jealousy factor is like x100234 on my end right now Jason...

[support@proline]

Don't Worry Al,the price is not going to be as bad as you think ,ofcourse more than other products but does the job of a few streams & wave boxes,I believe the smallest RDII pushes something more than 5000gal/hr .
It's an inovative approach IMHO,which makes it interesting ,I will keep you posted once I get the tank.:mrgreen:

[albert_dao]

Oh, how come the holes are so small in that tank man?

[support@proline]

Are you talking about the exit holes?
Originally was thinking 4x3/4" but the final design was changed to 4x 1",& the Intakes are 2.5" each . so I think that should be fine considering the union on the RDII I had in mind will work fine with 1.5" but we will use a reducer from
2.5" to 1.5"on each intake.

[kari]

Didn't notice any skimmers in the photos, just the shop tools.

[albert_dao]

You haven't had enough beers yet Kari.

[lastlight]

Best post ever?