vanreefer
05-07-2007, 01:09 AM
Hey Looking to sell my DIY ozone reactor system includes:
ORP controller (4 months old) and Enaly 200mg/h ozone generator and air dryers:
info on ozone:
http://www.marinedepot.com/aquarium_marine_depot_educational_newsletter_artic les_paletta_ozone_ozonizers.asp?CartId=
http://i28.photobucket.com/albums/c205/vanreefer/DIY/controllerandO3generator.jpg
ORP info:
http://oceanaquatics.com/store/product/717/Milwaukee-ORP-Smart-Controller/
Main ozone reactor: 8" x 16" deisgned to mix the ozone and water in a down tube (with an air stone) I'm using bio balls for media (to catch the bubbles) but was planning to change to bio bail avilable at OA.
Degasing reactor: used to romove excess ozone 4" X 12" I change carbon in this about once a month and can't detect the smell of ozone
Pics:
http://i28.photobucket.com/albums/c205/vanreefer/DIY/Picture355.jpg
http://i28.photobucket.com/albums/c205/vanreefer/DIY/Picture352.jpg
http://i28.photobucket.com/albums/c205/vanreefer/DIY/Picture365.jpg
all reactors are 1/4 cast acrylic, and don't leak although I put them in the sump for lack of space. I was able to easily keep the ORP (oxygen reduction potential) over 400 Mv with this system on 220 gal with moderate fish load.
PM with interest
Motivated seller as I am looking to try a different style of nutrient management
ORP controller (4 months old) and Enaly 200mg/h ozone generator and air dryers:
info on ozone:
http://www.marinedepot.com/aquarium_marine_depot_educational_newsletter_artic les_paletta_ozone_ozonizers.asp?CartId=
http://i28.photobucket.com/albums/c205/vanreefer/DIY/controllerandO3generator.jpg
ORP info:
http://oceanaquatics.com/store/product/717/Milwaukee-ORP-Smart-Controller/
Main ozone reactor: 8" x 16" deisgned to mix the ozone and water in a down tube (with an air stone) I'm using bio balls for media (to catch the bubbles) but was planning to change to bio bail avilable at OA.
Degasing reactor: used to romove excess ozone 4" X 12" I change carbon in this about once a month and can't detect the smell of ozone
Pics:
http://i28.photobucket.com/albums/c205/vanreefer/DIY/Picture355.jpg
http://i28.photobucket.com/albums/c205/vanreefer/DIY/Picture352.jpg
http://i28.photobucket.com/albums/c205/vanreefer/DIY/Picture365.jpg
all reactors are 1/4 cast acrylic, and don't leak although I put them in the sump for lack of space. I was able to easily keep the ORP (oxygen reduction potential) over 400 Mv with this system on 220 gal with moderate fish load.
PM with interest
Motivated seller as I am looking to try a different style of nutrient management