My first frag!

[Kabong]

I finally got to put my x-mas present to use!
35,000 RPM :P
http://images.canadiantire.ca/media/images/Assortments/PrimaryAssortments/Tools/PowerTools/CordedTools/RotaryToolKits/0544602_450_CC_4dab5.jpg


The Victim
My green tipped hammer.
http://members.shaw.ca/kabong/hammer.jpg

Surgery results
http://members.shaw.ca/kabong/frag.jpg

After recovery
http://members.shaw.ca/kabong/recover.jpg

Well after getting over my initial nervousness, I must say it was pretty easy.
Took less then a minute and besides the coral sliming up from being out of the water it showed no ill effects.

[NanoReef]

lol, very nice frag. nicley done with the dremal! lol

[addam4208283]

holly crap i wish i got something like that for xmas. that thing is pimp.

[fishguyxd]

So did you use a saw type blade disc or how fast did you have the rpm going?

[Kabong]

I used a reinforced cut off wheel on max speed (35,000 RPM)
http://www.dremel.com/html/images/products/bits/large/426.gif
All it needed was a slight bit of pressure, and it sliced through with no problems.

From what i hear a lot of guys use the diamond edged wheel,
http://www.dremel.com/html/images/products/bits/large/545.gif
but its circumference is smaller then the one i used. I whould have had to cut all the way around the branch and try to meet in the middle. With the blade i used i was able to cut all the way through from one side.