View Full Version : Clam Refugium
Gizmo
11-15-2005, 02:19 AM
I've been thinking of putting togeather a shallow clam refugium. Has any one here tried this before? I was thinking maybe a 20g Long n' Shallow would work nice w/ a 400w MH. I figure a Mag7 for the flow from the current sump clean side. Suggestions appreciated :biggrin:
Joe Reefer
11-15-2005, 02:24 AM
How many clams are you planing?
Gizmo
11-15-2005, 02:28 AM
In a 20 Long, Probably 6 maybe 7 T.Crocea.
SeaHorse_Fanatic
11-15-2005, 03:48 AM
Just make sure the current isn't too strong because clams don't like their lips (mantles) flapping. :lol:
Invigor
11-15-2005, 03:55 AM
I was thinking maybe a 20g Long n' Shallow would work nice w/ a 400w MH
http://www.morepower.com/images/hi/timallen.gif
Murminator
11-15-2005, 04:19 AM
I have a 400MH on a 29 gal.....ohohoh !!!! :eek:
Funky_Fish14
11-15-2005, 04:58 AM
Lol I used to have my 400 on my 33.
I think it would be plausible, but I think you would need more clams.
Im sure low-light clams would work just as well?
Chris
Gizmo
11-15-2005, 04:59 AM
Har Har Har. Thanks Al. :biggrin:
I was thinking maybe a 20g Long n' Shallow would work nice w/ a 400w MH
http://www.morepower.com/images/hi/timallen.gif
Delphinus
11-15-2005, 03:49 PM
Moved to reef forum...
haha that would be a pretty colorful setup.
I think your main goal (especially for the corcea) is : tons of light, minimal (but not too minimal) flow. Blast them with lots of light and like mentioned not too much flow so their mantles are flapping.
You'll also have to keep up with the calcium demand as well.. but that shouldn't be too difficult.
I think it would be a pretty colourful setup indeed
Delphinus
11-15-2005, 04:39 PM
Clams are best viewed from above, thus I've always liked the kinds of tanks that have the front panel go up at a diagonal to allow for that. I haven't seen too many people try it though (Ok scratch that, what I mean is I haven't seen anyone I know try it). I guess the tank itself would be hard to find, it's not really a standard thing although it wouldn't be hard to fabricate so you could either get a custom builder or do it yourself (glass or acrylic).
You can see an example of what I'm talking about in the picture on the top of the wetwebmedia tridacnid FAQ page. http://www.wetwebmedia.com/tridacsysfaqs.htm
If I ever made a "clam specific" tank or refugium one day that's what I'd want to do. :cool:
I have thought about doing this as well. I bought Deb's 44g cube and was thinking that I would like to turn that into a clam tank. My thought on it is to have a low - like 2' stand built so that the tank sits really low and you can view it from above. Still trying to work this out though.
Gizmo
11-15-2005, 09:11 PM
The angled front would make viewing easier for sure. I was thinking of using a surge type flow system and use the Mag9 to fill the surger. From what I've read clams do their best higher up on natural reefs, closer to shore, where there would be an in and out wave more than a constant flow across.
Invigor
11-15-2005, 09:13 PM
Clams are best viewed from above, thus I've always liked the kinds of tanks that have the front panel go up at a diagonal to allow for that. I haven't seen too many people try it though (Ok scratch that, what I mean is I haven't seen anyone I know try it). I guess the tank itself would be hard to find, it's not really a standard thing although it wouldn't be hard to fabricate so you could either get a custom builder or do it yourself (glass or acrylic).
You can see an example of what I'm talking about in the picture on the top of the wetwebmedia tridacnid FAQ page. http://www.wetwebmedia.com/tridacsysfaqs.htm
If I ever made a "clam specific" tank or refugium one day that's what I'd want to do. :cool:
they just built a new petsmart here in regina, and that's how all their tanks are displayed. pretty neat idea
vBulletin® v3.7.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.