View Full Version : 3 3' NOs on WH7
StirCrazy
09-09-2002, 12:29 AM
how many bulbs do you want to put on there Adam?
Steve
Steve, check out the Topic title :D .
StirCrazy
09-09-2002, 12:40 AM
Originally posted by MAK:
Steve, check out the Topic title :D .<font size="2" face="Verdana, Helvetica, sans-serif">ya thats what I am guessing but I am not sure.. could be a reference to what the site says..
anyways run two in series with two wires and then use the other two wire for the other one.. I think that is how Bruce has his set up Adam.
Steve
reefburnaby
09-09-2002, 12:50 AM
Hi,
In theory...you can run all four wires (shorted together) on to three tubes in parallel. I am not sure what the lighting output would be and you might be stressing the lamps if you only have 1 lamp (out of the 3) working. Stressing means driving VHO levels in to NOs.
- Victor.
One_Divided
09-09-2002, 04:58 AM
The wiring diagram I have seen for this on the fulham website only shows 3 of the 4 red wires being used.. Is there a way I can wire the bulbs in and add in the 4th wire for a little more light? Or will it not be much different anyways?
Here's what I found:
http://www.fulham.com/NewFiles/wire08.gif
ldzielak
09-09-2002, 02:45 PM
Steve is correct, I have 3 x 3' with 2 in series with 2 wires and 1 with 2 wires alone.
Lee
One_Divided
09-10-2002, 04:10 AM
ok good. thanks guys..
vBulletin® v3.7.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.