sleeman
08-19-2005, 10:56 PM
Lexan Acrylic Sheet
4'X 5' X 1/4"
31" X 4' X 3/8"
The Lexan is not as easy to work with. The part to be glued needs to be scuffed prior to glueing. It also welds best with Weldon 5 and 40.
The 1/2" stuff makes great flanges. They do however come apart at about 80 PSI in case you are wondering. Note to self, don't run 80 psi into Kalk Reactor.
Acrylic
2' X 4' X 1/4"
2' X 4' Egg Crate
Weldon 3 - 4 oz - 1/2 left
Weldon 5 - 1 pint - 3/4 left
Weldon 16 - 5 oz tube - 7/8 left
Weldon 40 - two part - 3/4 left
200 bucks takes it all.
Al
4'X 5' X 1/4"
31" X 4' X 3/8"
The Lexan is not as easy to work with. The part to be glued needs to be scuffed prior to glueing. It also welds best with Weldon 5 and 40.
The 1/2" stuff makes great flanges. They do however come apart at about 80 PSI in case you are wondering. Note to self, don't run 80 psi into Kalk Reactor.
Acrylic
2' X 4' X 1/4"
2' X 4' Egg Crate
Weldon 3 - 4 oz - 1/2 left
Weldon 5 - 1 pint - 3/4 left
Weldon 16 - 5 oz tube - 7/8 left
Weldon 40 - two part - 3/4 left
200 bucks takes it all.
Al